Sanergy is a social enterprise based in Nairobi, Kenya, that safely collects and treats 12,000 tons of waste, converting it into valuable products: insect-based proteins derived from black soldier flies for animal feed, organic fertilizer, and biomass fuel briquettes. This model provides a closed-loop, zero-waste solution that ensures waste is transformed into high-quality sustainable products. We are in the process of scaling up our production of insect-based animal protein to convert roughly 70,000 tons per year of organic waste into 3,600 tons of animal feed through the construction of a new advanced facility. Sanergy is a devoted Autodesk user, and this massive construction project provided an opportunity to capitalize on the power of BIM 360 software. In this session, we will review the training given by third-party providers via the Autodesk Foundation, the challenges faced when rolling out a new technology-based way of working in construction within the context of an African country, and the benefits achieved.

University College London at Here East, a new manufacturing center in east London opened in 2018, hosts a new master’s degree in design for manufacture uniquely within a school of architecture. Equipped with industrial robots, computer numerical control (CNC) milling and turning machines for fabrication and structural frames, large-scale metrology, and climate chambers for testing, UCL at Here East strives to cultivate an environment with students at the interface between a design studio and the point of industrial production. How might the well-established methods for manufacturing in automotive and aerospace be used in construction? This session will present an educator’s approach of “model-make-measure,” showing how the course connects students with the properties of materials used to construct buildings and the fabrication processes these materials undergo existing as nominal digital design intent. Examples will show how this approach has suggested novel design outcomes and ways of working, offering skills transferrable to the construction industry.

Industrialized construction is becoming a household name within the building industry due to its advantages in improving productivity, quality, accuracy, and efficiency. Applying innovative BIM (Building Information Modeling) workflows and using advanced technologies through all stages from design to production has been one of Nordic Office of Architecture’s most important strategies for success in industrialized construction. In this class, you will gain insight into the Scandinavian way of industrialized construction, and see how a cross-disciplinary collaboration with the software development team of Project Frog has enabled new possibilities to aid in design for manufacturing and assembly (DfMA) and BIM workflows. We will showcase both a large-scale hospital and a smaller-scale set of high-end prefabricated housing. This collaboration reflects on the challenges that architects and engineers have faced in the presence of repeating information, and provides a step-by-step workflow for similar projects (hotels, schools, office buildings, and so on).

The traditional method of building walls using studs is labor and time intensive, and results in a fundamentally flawed product, with a substantial percentage of the wall being thermally and acoustically bridged. BamCore has developed a wood-bamboo hybrid panel that is structural and load bearing. It enables the firm to build walls from panels that are prefabbed to customer specifications. It eliminates 80-90% of the internal framing, along with the thermal and acoustic bridges that framing creates in traditional walls. It also reduces the need for hard-to-find job-site labor. This class will cover the design steps we use, CAD-CAM workflows, the marking of MEP locations, and our job-site app, providing a comprehensive view of our industrialized construction processes. We will also talk about the tremendous sustainability of the BamCore system, which comes both from the use of incredibly fast-growing timber bamboo and also the dramatically improved thermal envelopes that our walls provide.

Carleton Immersive Media Studio (CIMS) has been involved in the 3D modeling of judicial evidence for homicide cases since 2015. The lab has refined its modeling workflows based on the established use of reality capture (photogrammetry) and BIM (Building Information Modeling) to model artifacts and buildings. Working with the coroner’s office, CIMS has incorporated newer forms of 3D modeling and real-time rendering to establish a standard for displaying digital representations of photographic evidence in a courtroom setting. In this class, we’ll cover our modeling process, starting with analyzing evidence to presenting the data in a user-friendly format. Utilizing Maya software, we’ll model a series of anatomical base meshes that we’ll then manipulate to show inflicted injuries. Next, we’ll texture map the models in Mudbox using photos as reference. Finally, we’ll combine the pieces in Unreal Engine using a template. The addition of blueprints and widgets complete the final product.

This session will introduce LotSpec, an Option Management add-in which automates “Lot-Specifics” within Revit and AutoCAD Architecture. We will be interviewing a LotSpec user from Smith Douglas Homes. The session will discuss the pain points home builders face and how LotSpec can help ease the burden of site specific architecture. We will cover how LotSpec can automate the process to improve organization, project management, and estimating by providing concise drawings. LotSpec uses a rules-based workflow to assign logic to project elements. The automation process assists in eliminating combination errors and reduced red-lines.

Fusion Lifecycle software can be deployed faster than any other PLM (product lifecycle management) tool on the market. This was tested for a company that wanted to take its ventilator project to production in the shortest time possible due to the COVID-19 ventilator shortage. A prototype of the ventilator was completed using Fusion 360 software. Now it is time to take it into mass production using Items and BOMs, ECO, and NPI Workspace of Fusion Lifecycle.

How often have you made a simple change to a part file in Inventor software, only to return to the assembly—which EXPLODES! We know that this has happened to you—it's happened to the speaker, too! In this class, we will learn simple and effective strategies for building parametric, stable assemblies that can easily be updated. We will discuss best practice for structuring assemblies and how to scale when working with large assemblies. We will learn how to use relationships effectively, and when to use the alternatives. We will learn how to prepare a design for “top down” parametric change, and how we can trigger changes using iLogic. Finally, we will learn how to document our design intent to ensure that our colleagues can work with our assemblies as effectively as we can.

Industrialized construction is here to stay; prefabricated elements in the built environment and the design-for-manufacture-and-assembly (DfMA) process that enables it are fast becoming the norm across all sectors. So why is it that most of the case studies and best practices we see relate to volumetric modular construction of housing and hospitality? What about the vast but largely unsung impact of advanced building products, single-trade assemblies, and multitrade assemblies that make up the majority of the market? This panel will invite leaders from across the prefabrication continuum to explore why it's not just about modular.

You don't have time to learn 3D modeling? All your legacy data is 2D? Your customers demand 2D drawings from you? You know that there is a better way to get your work done, and help your colleagues downstream—but you’re under too much pressure to spend time working this out? Well, 2D and 3D workflows don't have to be mutually exclusive. Your best option could be a combination of both. You can have the flexibility of 2D AutoCAD software when you need it, and the automation power of Inventor software when you're ready. In this presentation, we'll see how you can move from 2D to 3D at your own rate. We'll show you how to reuse your legacy 2D data in a 3D workflow, and how to repurpose your 3D data as 2D drawings for your customers. AutoCAD and Inventor work better together, for 2D + 3D workflows.

This class will try to give an introduction to the new features within Fusion 360 software regarding electronics cooling simulation. A real model can be simplified in Fusion 360, and then taken through the whole workflow of setting it up, running simulations, and analyzing results. The class will also capitalize on the other capabilities from Fusion 360, to combine the design optimization with Fusion Mechanical simulation and Generative Design in Fusion 360.

The assessment of Generative Design in Fusion 360 software is based on the capability assessment model related to the key capability areas of generative design for general applicability and their associated criteria outlined in the intrinSIM Market Report entitled “A Vision for Generative Design,” which explores the potential of a shift enabled by generative design and what is required to enable that design shift. intrinSIM has developed a process with a quantified assessment for each key capability area in the capability assessment model and criteria outlined in “A Vision for Generative Design.” The same capability assessment model can be used for determining requirements for specific generative design applications, and the suitability of generative design workflows for specific applications.

With many projects being vastly different from one another, it can be hard to figure out what exactly your BIM (Building Information Modeling) and virtual design and construction (VDC) needs will be for your project. AECOM Hunt has had the fortune to work on and coordinate many different projects. We have learned that, while perhaps similar, no 2 projects or teams are the same, and that each must be handled uniquely. During this course we will share our experiences on 4 projects: Little Caesars Arena, home of the Detroit Redwings; Aloft Magnificent Mile, Chicago; Mount Carmel Hospital, Grove City; and Kite Pharma-Cell Therapy. Other topics will include BIM (Building Information Modeling) stages such as coordination, completion, and turnover.

All great products start with an idea. See how Vault PLM software can help you get your latest product innovations to market on time and on budget.

The complexities around digital twins are usually enough to make most tech enthusiasts in the architecture, engineering, and construction industries think twice before embarking upon their use. From setting up IoT hubs and sensors to linking them with intelligent models and hosting them in client-facing experiences, the concept can be daunting. However, developments in gaming engines and their innate customization and ability to craft a story and experience mean that they are fast becoming great tools in the creation of digital twins. In this talk, we will look at the steps and stages involved in creating a digital-twin experience using the Unreal Engine game machine, in addition to showcasing industry case studies. We will break down the steps, from linking models from packages such as Revit software and 3ds Max software, to connecting to simple sensor data and visualizing the output. Here we explore the toolset and process required to help you embark on your own first digital twin.

We all want to shut the door on 2020 and move on quickly, but we cannot learn without reflection. Through the dark cloud of the pandemic arose the bright lights of creativity and innovation that we are using to navigate a path forward. Virtually pull up a chair and join us as we recount the good, the bad, and everything in between. Learn about construction's critical role in the economy, the innovative field hospitals, alternative manufacturing, and the surprising digitization that happened. The host and panelists will review the stories that arose during the pandemic for a retrospective of lessons learned, and illustrate ways construction as an industry can move forward, stronger.

The second of a two-part series discussing the ways to Configure your vault without expensive custom code that has to be compiled year over year. Part two will cover the use of Data Standards. We will explore various use cases and configurations of Data Standards to make your Autodesk Vault work for you in your environment. How does Data Standards work? How to effectively deploy Data Standards to your end users. And how to create effective utilities with Data Standards, solving irritating discrepancies in your data. Learn how to utilize your Custom Objects in the first part, Vault—Configure Don't Customize: The Power of Custom Objects (Part 1 of 2).

The challenges we face in our industry revolve around saving time and money. Traditional methods of design engineering do not embrace the technological evolution of CAD software. There's a better workflow, and the software is already available to seamlessly integrate design drafters, engineers, and steel detailers into one model. I will walk you through the lifecycle of one of our projects with the use of Revit software and Advance Steel detailing software, of designers working with detailers, to produce fabrication drawings without producing a single structural design drawing.

International TechneGroup (ITI) is expert in CAD data interoperability, and the firm has partnered with Autodesk in order to help CAD users convert CAD data into Inventor software through an automated and accurate process. Specific market trends drive companies to change their CAD systems to Inventor software. Design teams may have invested years of effort and large amounts of resources into these legacy CAD designs; therefore, changing CAD systems and migrating valuable CAD data can be a painful process. Stakeholders’ biggest concerns when moving CAD data to Inventor include preserving intellectual properties, such as design intelligence, parametrics, and features. Join us to learn about the drivers and technology behind CAD conversion with GoToINVENTOR, a partnership between ITI and Autodesk. As well as explaining the technology behind automated CAD conversion, we will introduce you to GoToINVENTOR and show you how we can support your CAD conversion project in a fully automated process.

During this Instructional Demo, you will be guided through a workflow to create a 4D planning within Navisworks. The workflow will be presented using 3 case studies of infrastructure projects within the Netherlands. The overall benefit of 4D planning in construction projects is the awareness of time-related clashes in advance, instead of encountering them on the construction site. However, the underlying motive to use 4D planning is slightly different in every project. In addition, every project encounters different challenges, phases and objects. The application of a 4D planning in our case studies in a nutshell: 1) Maintenance on Schiphol Airport: Heijmans is responsible for the maintenance of several runways, airstrips and taxiways on Schiphol Airport in the Netherlands. 4D planning is used to visualise different scenarios in the availability of runways, airstrips and taxiways and to tackle high risk areas during activities. Besides these applications, the 4D planning is a central element during daily stands to discuss the planning and the risk areas for that day; 2) Provincial road N280: this project comprehends a reconstruction of the main road in Roermond, including the construction of an underpass using the existing intersection. The 4D planning is used to generate site plans of activities and potential clashes in time; 3) Expansion of the Beatrix-lock: the threat of a nautical bottleneck due to the increasement of shipping required an expansion of the Lekkanaal and the construction of a third lock. In this project a 4D planning visualised different construction phases with extra attention to high-risk activities, such as the placement of the new lock gates. The 3D model and planning are also used for a 3D print of the lock with monthly renewed aerial photographs as a base. This 3D print was the key element for lean planning sessions. This Instructional Demo highlights the essential steps and best practices in the workflow to generate an added-value 4D planning as used for above-mentioned projects. The workflow starts in the design phase with encoding your objects in your 3D model, since this is one of the most important steps in the process. After that, a demo will guide you to the steps of how to create the link in Navisworks between your planning and 3D model. To end the demo, a short instruction on how to generate a simulation of the created 4D planning will be provided.