記事
記事
記事

Scaling BIM for Resilience: Automated Designs to Retrofit Informal Housing

この記事を共有

By 2030 more than 3 billion people will be living in substandard housing conditions. This means that over a third of the global population won’t have access to safe housing. Also, climate change and rapid urbanization are contributing to the increased levels of risk in developing countries. One of the main causes of substandard housing is informal construction, which takes place when low-income families move from rural to urban areas and build their homes without technical guidelines. The result is massive neighborhoods filled with poorly built houses that lack structural components necessary to withstand natural events like earthquakes and windstorms.

view
Panoramic view of one of the informal neighborhoods in Medellin, Colombia.

This article details the results of six years of work focused on preventing deaths from earthquakes in Colombia. In total, the nonprofit Build Change has been working for 15 years in 14 countries saving lives from earthquakes and windstorms. By working together with the ministry of housing, government agencies, and building authorities, Build Change has been an influential leader in the efforts to solve the substandard housing crisis through innovation and technology.

zones
The seismic hazard shown in terms of Ground Peak Acceleration (left). The concentration of buildings in Colombia (right). 

Build Change’s approach for addressing unsafe housing is retrofitting, which essentially is strengthening an existing building that lacks structural integrity. This methodology is the most sustainable and cost efficient because it reduces the social impact of relocation and cuts down costs up to a third of reconstruction. 

Nicolas Abello of the nonprofit Build Change talks about using innovation and technology to help solve the challenge of substandard housing.

National House Improvement Program and Scalability Challenges

How to improve the living conditions of 2 million people?

In response to an imminent seismic risk and to improve lives of over 2 million people, Colombia’s government envisioned a nationwide program to take place on a four-year timeframe. The program “Casa Digna, Vida Digna” aims to improve 600,000 houses from an architectural and structural standpoint. Build Change was appointed as the technical consultant for the Ministry of Housing to design a framework that allows scalability and efficiency of the program. Our support to the national program focused on two areas: structural engineering and process innovation.

First, we had to come up with a structural solution to make poorly-built houses safer, keeping in mind cost efficiency and local construction materials available. Once the engineering was set, we had to solve different challenges involving the bigger picture such as working in spread-out remote locations, lack of qualified labor, and more importantly, the magnitude of the program. In other words, the engineering was not enough to implement “Casa Digna, Vida Digna.” Instead, we had to think of new workflows to ensure the program’s success.

Traditional Workflow of Retrofit Projects

Traditionally, the process of structurally retrofitting a building requires a sequence of steps that can be summarized into four stages: Data Collection, Data Processing, Document Production, and Construction. The workflow starts once a house has been identified as a potential beneficiary and all the requirements for subsidy are met. Once the subsidy procedures are completed, trained staff must visit the house to do an initial assessment and collect data. Then, this data is taken into the office where analysis is performed to define which structural solution should be implemented. Once the retrofit design is defined, engineers and architects assemble a set of construction drawings that must be approved by the building authority to start with the construction activities.

workflow
Traditional retrofitting workflow, from field data collection to construction of the retrofit solution.

To have a better understanding of the whole workflow, each stage is described below:

1. Data Collection

This part of the process takes place in the field, at the house intended to retrofit. It’s done by trained staff, either civil engineers, architects, or professionals instructed in earthquake-resistant construction. In this stage, two types of data are collected: a geometrical survey of the house, which records all the measurements of walls, windows, doors and floors in a hand sketch. Then, the second data type is homeowner information together with seismic site parameters to calculate the vulnerability status.

sketch
An example of a hand sketch recording measurements from an informal house in Bogota, Colombia.

2. Data Processing

This stage includes a vulnerability assessment, followed by a structural analysis which will establish the retrofitting techniques required. They breakdown as follows:

  • Vulnerability Assessment
    The factors that determine the degree of vulnerability of a house include site hazards (such as landslides or floods), seismic parameters intrinsic to the area and the structure configuration.

  • Structural Analysis
    Informal housing lacks a proper design and often are built without fundamental structural elements. Therefore, structural engineers must analyze the structure configuration and the materials used to calculate a seismic demand for the building.

  • Retrofit Proposal
    As a result of combining the vulnerability assessment and the structural analysis of the building, engineers come up with a retrofit proposal. This includes a set of structural elements such as columns, beams, ties, dowels and other solutions to ensure the building won’t collapse during an earthquake.

3. Document Production

The third step of the process is crucial because it wraps everything done until now in a concise package of information known as the Construction Package. In other words, this document portrays a timeline for the house intervention because it shows the initial conditions of the structure, the results of the analysis and what’s needed to make it safer. In detail, this construction package includes:

  • Existing plans of the building, including architectural and structural elements

  • Results from the structural analysis that determine the intervention’s scope

  • Retrofit plans of the building, specifying materials and elements for the intervention

  • Construction details of the retrofit elements

  • Cost estimate or Bill of Quantities (BOQ)

4. Construction

Once the construction package is approved by the local building authority, the project has a green light to begin construction works. The retrofit solution includes the construction of new elements such as columns, beams, or jacketing, and also modification of existing walls, slabs, and existing structural components.

Bottlenecks and Limitations for Scalability

The previous retrofitting workflow has been implemented by Build Change in seven countries. However, it has never been used in a large-scale national development. With this in mind, to effectively implement a nationwide program for retrofitting, this workflow had to be reassessed from a cost and time perspective. The image below shows a map of the workflow, focusing on processing time and information exchange.

mapping
Mapping of the existing workflow, focusing on time and resources spent on each activity.

A systems-based analysis of the traditional workflow revealed several bottlenecks that limited its use for a nationwide implementation. The stages that represented most of the inefficiency were Data Collection, Data Processing, and Document Production. In the current workflow, information was not integrated on a single platform and different data types implied extra work for conversion and processing. The most significant bottlenecks identified are detailed below.

  • Data collection implied using trained resources such as engineers or architects to visit houses to conduct the geometric survey and vulnerability assessment. A large-scale implementation would be extremely costly using this scheme and the scarcity of trained staff could slow down the program.

  • The process of collecting geometric data for the house using a hand sketch was time consuming (it could take up to three hours) and produced inaccuracies down the line. For instance, during the design phase an engineer could find a missing measurement which forced the design process to stop until field staff confirms this missing value.

  • An engineer had to convert the hand sketch into a Revit model that represents the existing conditions. This required interpretation skills from the engineer and often led to errors in the model. Depending on the complexity of the house, this process could take up to two days.

  • The structural analysis was done using Excel spreadsheets that calculated shear and gravity loads. General behavior of the structure was verified through static linear analysis, checking stress concentrations and different failure modes. This engineering methodology is not suitable for a large-scale implementation because it focuses efforts in a case-by-case analysis.

  • Once the analysis defined the retrofit intervention, engineers proceed to add new structural elements to the model. This process involves a lot of Revit adjustments, dealing with phasing, element parameters, and graphics. The production of the Construction Package for one house could take up to nine days, taking into account rework caused by data inaccuracies and retake of measurements in field.

  • As a whole, there wasn’t a platform that integrates data from all stages to manage the project. Progress was tracked using an online spreadsheet but there was no way of incorporating all data types into one platform to have a global understanding of progress, delays and performance.

In summary, the existing methodology for retrofitting houses was not optimal for a large-scale deployment. The workflow heavily relied on qualified labor, which increased the cost considering the number of houses that would be retrofitted simultaneously. Also, the long processing times in design and document production phases, made the overall operation too expensive for scaling it up.

For instance, a typical two-story house would need a team of two trained professionals to assess and take measurements on site (usually civil engineers or architects), plus a structural engineer in the office performing analysis and retrofit design, and a drafter (could also be an engineer or architect) that puts together the set of plans, calculations and cost estimate in a construction package. This whole workflow normally takes from five to nine working days on full schedule, and varies depending on the complexity of the house. Now, considering the magnitude of the National Program we are addressing and the number of houses to deal with, this workflow is nonviable in terms of costs and time.

Proposed Workflow for Large-Scale Implementation

The reassessment of the retrofitting workflow showed key aspects to improve in order to make the national home improvement subsidy program feasible from a technical perspective. Qualified labor reliance, time spent in designs and document production were targeted for a redesign. The goal was to make a smooth workflow that streamlined the production of code-compliant retrofit designs with a focus on cost and time efficiency.

The solution we found to improve our workflow is based on third-party apps integration and BIM-automated tools. By setting our priority on the time spent in each process, we managed to overcome interoperability barriers between different software used. With this in mind, each bottleneck was addressed with a particular solution that, altogether, represented time savings of up to 78% in the workflow. A breakdown of the bottlenecks and their solution is summarized in the table below:

bottleneck
Bottlenecks found in the traditional workflow and tech-based solutions to address each one.

For the most part, automation of BIM tools had the most impact in the overall performance of the workflow, creating the biggest savings in time and effort. On the other hand, use of third-party apps and the platform integration made it possible to keep track of every house during all stages, and kept information organized throughout the process. Each one of these solutions will be discussed in more detail later.

How We Did It: Framework for BIM-Automated Tools

In a nutshell, we reduced the processing time per house by 78% while keeping the thoroughness of structural safety analysis and quality. The keys for this improvement were third-party app integration and automation of our BIM tools. By tweaking our existing workflows and adjusting the engineering methodology, we achieved technical and economic feasibility to implement the large-scale national program.

The new workflow reduced the reliance on a structural engineer in the assessment and design phases, allowing nonspecialized staff to produce code compliant structural designs automatically. In other words, we adjusted our engineering methods to allow for their automation. This streamlined the design production without using costly resources (trained structural engineers) and focusing them at the end of the process for revision and approval.

Nicolas Abello explains how BIM and automation are used to streamline the process of data collection and engineering to retrofit housing.

Data Collection

In the traditional workflow, the information was registered using paper and predefined forms to gather data from the house and homeowners. This caused significant downtimes and delays down the line because of inaccuracies in measurements, missing information, human errors and inaccuracies. The way we tackled this issue was by integrating mobile apps that could be used in smartphones or tablets, even in an offline mode. We divided our data collection in two groups: geometric survey and general information survey. Having our data divided in two categories enabled us to use specific apps to deal with different types, simplifying the overall process.

Magic Plan

This mobile app allows you to draw house floorplans including walls, windows, doors, floors, and other existing elements with your fingertips. Using predefined templates, we created a standardized protocol to draw house floorplans including key elements for the design phase. Also, the app was linked to a laser measure device to speed up the measurement taking. Once the survey is completed and internet connection is available, the plan is uploaded to the cloud where it can be downloaded from the office or any location.

phone
Sample of a house floor plan recorded using Magic Plan.

Fulcrum

The second portion of the data collection happened in Fulcrum. This mobile app is widely used in construction, manufacturing, and logistics for data capture and creation of smart forms. We incorporated this app into our workflow to collect and process information based on location. The form builder allowed us to design mistake-proof surveys that guided the surveyor through the questionnaire with adaptive responses and skip logic which made the process simple and efficient. More importantly, Fulcrum allowed integration with GIS that included seismic and vulnerability parameters from official databases. In this way, detailed information that used to be processed in the office is now preloaded in a digital form and ready to be used in field.

fulcrum
GIS databases of seismic hazard being converted to a grid of points to be linked through GPS coordinates into the form.

The integration of these third-party apps into the system improved data collection, making it more accurate, faster, and intuitive enough to be used by a nontechnical surveyor. Similarly, by integrating GIS information from vulnerability and seismic hazard databases, the assessment is done by the app, removing the need for a structural engineer on site. This improvement was achieved by overlapping location-based data such as peak ground acceleration and soil type with house configuration data (wall lengths, location and inter-story height) to calculate vulnerability status.

In this way, the data collection could now be performed by social mobilizers, students, volunteers, or anyone with a few hours of training. With this we had a massive cost reduction, by allowing anyone with some instruction on how to use the apps to collect data. Just imagine training people remotely on how to take geometric surveys all around Colombia in a few minutes with an app and a smartphone. That’s what scalability is all about.

Once the data is collected using Magic Plan and Fulcrum, both data packages are sent to a web based platform developed specifically for this program by Build Change. Essentially, this platform receives the plan made in Magic Plan and links it with the Fulcrum data using the homeowner name and ID. At this point, information from the house measurements, materials, configuration and vulnerability status are stored in an XML file.

Existing Model Generation

Right after data has been collected and stored in our web based platform, the second step is to model the existing conditions of the house. Traditionally this was done by looking at a hand sketch with measurements and annotations of the house and manually modeling it in Revit. Now, with the data collection digitalized and stored in our web based platform as an XML file, this process improved substantially. To speed up the existing modelling, we designed visual programming scripts in Dynamo that automate the house creation in Revit.

Here’s how we did it. All the information gathered in field is stored in an XML file, including the geometrical position and characteristics of all elements in the house. To extract this information, we used Python Dictionaries to parse the data and arrange it in a way that Dynamo can use it. The Python codes go through the hundreds of lines of code and obtains the required coordinates and element attributes for an automated modeling process. Some of the key info parsed by the script is shown below:

script
XML file with wall location coordinates, element dimensions, and characteristics needed for the automation scripts of the existing house.

A Python script deconstructed the list of values in the XML file and arranged the values needed by Dynamo to model wall, windows, doors, floors and slabs. There’s different values for each element, so they must be organized per type as follows:

  • Walls

             - X and Y coordinates for start and end points

             - Wall height

             - Wall type (thickness and material)

  • Windows and Doors

             - X and Y coordinates of the insertion point

             - Width, Height, Sill Height

             - Window/Door type

  • Slabs and Floors

             - X and Y coordinates of perimeter points

             - Elevation from level zero

             - Floor type (thickness and material)

Next, information is read by the Dynamo scripts separately for each category. For example, to model walls through Dynamo nodes we must obtain all the geometry from the parsed XML file and then organize it into start and end point coordinates. These can be represented as a point and then converted into a line with the “Line by Start Point End Point” node as shown below:

dynamo
Start- and end-point coordinates converted into base lines for walls using Dynamo.

The next input for wall creation are base and top levels. These are obtained from the parsed XML data, where each room created in the Magic Plan floorplan has an elevation. The Dynamo script then gathers this elevation and defines the levels accordingly. Finally, the wall type must be defined to the wall creation node to model the exact wall recorded in Magic Plan. This attribute is stored as a code which is replaced for the name of the wall family in Revit. The steps explained above are represented in the following portion of the script:

geometry
Existing wall creation using base line geometry, levels, and wall type.

Once the walls are modeled, similar scripts for windows, doors and slabs generate the rest of the existing house. Also, once these elements are placed by Dynamo, the “Phase Created” parameter is set to “Existing” to ensure they won’t interfere when the new (retrofit) elements are modeled. The result of the existing model is shown below:

house
Finished existing model of an informal house in Medellin, Colombia.

At this point, we’ve modeled the existing conditions of the house with exact measurements taken in field using Magic Plan, and a vulnerability status that resulted from Fulcrum data processed with seismic and soil parameters. The time spent in the existing house modeling decreased from one or two days to 10 minutes. Now, the house is ready to begin the structural analysis to determine the best retrofit solution.

Nicolas finished his studies in civil engineering in Bogota, Colombia. After working in commercial and infrastructure projects he became aware of how technology could improve productivity in the AEC sector. This encouraged him to question the way the industry works and inspired him to seek continuous improvement. He joined Build Change in 2018 to consolidate the New Frontier Technologies division, which oversees innovation for design and construction in all of the organization’s country programs. Since then Nicolas has worked in Colombia, Philippines, and Nepal leading the development of BIM tools for structural assessment, design and construction of safe houses and schools. Developments done by the New Frontier Technologies team have received international awards and created partnerships with major tech companies.

Noll is a senior international development professional who draws his primary motivation from innovation and from developing concepts that improve efficiency and effectiveness. For the past decade, Noll's focus has been on addressing the issue of substandard housing around the world. Specifically striving to improve houses’ resilience to natural disasters, including developing tech-based solutions to support the Government of Colombia in rolling out a national plan to seismically retrofit hundreds of thousands of houses, and providing homeowner-driven construction and retrofitting technical assistance to 25,000 households in rural Nepal, and to 2,000 families in informal neighborhoods of Port-au-Prince, Haiti. In 2018 Noll was promoted to head Build Change’s recently created New Frontier Technologies division.

Want more? Download the full class handout to read on.

______
icon-svg-close-thick

Cookieの設定

弊社にとって、お客様のプライバシーを守ることと最適な体験を提供することは、どちらも大変重要です。弊社では、お客様に合わせてカスタマイズした情報を提供し、並びにアプリケーションの開発に役立てることを目的に、本サイトのご利用方法についてのデータを収集しております。

そこで、お客様のデータの収集と使用を許可いただけるかどうかをお答えください。

弊社が利用しているサードパーティのサービスについての説明とプライバシー ステートメントも、併せてご確認ください。

サイト動作に必須:オートデスクのサイトが正常に動作し、お客様へサービスを提供するために必要な機能です

Cookie を有効にすることで、お客様の好みやログイン情報が記録され、このデータに基づき操作に対する応答や、ショッピング カートへの商品追加が最適化されます。

使用感が向上:お客様に最適な情報が表示されます

Cookie を有効にすることで、拡張機能が正常に動作し、サイト表示が個々に合わせてカスタマイズされます。お客様に最適な情報をお届けし、使用感を向上させるためのこうした設定は、オードデスクまたはサードパーティのサービス プロバイダーが行います。 Cookie が無効に設定されている場合、一部またはすべてのサービスをご利用いただけない場合があります。

広告表示をカスタマイズ:お客様に関連する広告が表示されます

Cookie を有効にすることで、サイトのご利用内容やご興味に関するデータが収集され、これに基づきお客様に関連する広告が表示されるなど、効率的な動作が可能になります。また、継続的にデータを収集することで、お客様のご興味にさらに関連する広告を配信することが可能になります。Cookie が無効に設定されている場合、お客様に関連しない広告が表示される可能性があります。

icon-svg-close-thick

サードパーティのサービス

それぞれの情報で弊社が利用しているサードパーティのサービスと、オンラインで収集するお客様のデータの使用方法を詳しく説明いたします。

icon-svg-hide-thick

icon-svg-show-thick

サイト動作に必須:オートデスクのサイトが正常に動作し、お客様へサービスを提供するために必要な機能です

Qualtrics
弊社はQualtricsを利用し、アンケート調査やオンライン フォームを通じてお客様が弊社にフィードバックを提供できるようにしています。アンケートの回答は無作為に選んだお客様にお願いしておりますが、お客様から自発的に弊社にフィードバックを提供することも可能です。データを収集する目的は、アンケートの回答前にお客様がとられた行動を、より正しく理解するためです。収集したデータは、発生していた可能性がある問題のトラブルシューティングに役立てさせていただきます。. Qualtrics プライバシー ポリシー
Akamai mPulse
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Akamai mPulseを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Akamai mPulse プライバシー ポリシー
Digital River
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Digital Riverを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Digital River プライバシー ポリシー
Dynatrace
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Dynatraceを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Dynatrace プライバシー ポリシー
Khoros
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Khorosを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Khoros プライバシー ポリシー
Launch Darkly
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Launch Darklyを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Launch Darkly プライバシー ポリシー
New Relic
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、New Relicを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. New Relic プライバシー ポリシー
Salesforce Live Agent
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Salesforce Live Agentを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Salesforce Live Agent プライバシー ポリシー
Wistia
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Wistiaを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Wistia プライバシー ポリシー
Tealium
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Tealiumを利用しています。データには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Tealium プライバシー ポリシー<>
Typepad Stats
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Typepad Statsを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Typepad Stats プライバシー ポリシー
Geo Targetly
当社では、Geo Targetly を使用して Web サイトの訪問者を最適な Web ページに誘導し、訪問者のいる場所に応じて調整したコンテンツを提供します。Geo Targetly は、Web サイト訪問者の IP アドレスを使用して、訪問者のデバイスのおおよその位置を特定します。このため、訪問者は (ほとんどの場合) 自分のローカル言語でコンテンツを閲覧できます。Geo Targetly プライバシー ポリシー
SpeedCurve
弊社は、SpeedCurve を使用して、Web ページの読み込み時間と画像、スクリプト、テキストなど後続の要素の応答性を計測することにより、お客様の Web サイト エクスペリエンスのパフォーマンスをモニタリングおよび計測します。SpeedCurve プライバシー ポリシー
Qualified
Qualified is the Autodesk Live Chat agent platform. This platform provides services to allow our customers to communicate in real-time with Autodesk support. We may collect unique ID for specific browser sessions during a chat. Qualified Privacy Policy

icon-svg-hide-thick

icon-svg-show-thick

使用感が向上:お客様に最適な情報が表示されます

Google Optimize
弊社はGoogle Optimizeを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Google Optimize プライバシー ポリシー
ClickTale
弊社は、弊社サイトをご利用になるお客様が、どこで操作につまづいたかを正しく理解できるよう、ClickTaleを利用しています。弊社ではセッションの記録を基に、ページの要素を含めて、お客様がサイトでどのような操作を行っているかを確認しています。お客様の特定につながる個人情報は非表示にし、収集も行いません。. ClickTale プライバシー ポリシー
OneSignal
弊社は、OneSignalがサポートするサイトに広告を配置するために、OneSignalを利用しています。広告には、OneSignalのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、OneSignalがお客様から収集したデータを使用する場合があります。OneSignalに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. OneSignal プライバシー ポリシー
Optimizely
弊社はOptimizelyを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Optimizely プライバシー ポリシー
Amplitude
弊社はAmplitudeを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Amplitude プライバシー ポリシー
Snowplow
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Snowplowを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Snowplow プライバシー ポリシー
UserVoice
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、UserVoiceを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. UserVoice プライバシー ポリシー
Clearbit
Clearbit を使用すると、リアルタイムのデータ強化により、お客様に合わせてパーソナライズされた適切なエクスペリエンスを提供できます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。Clearbit プライバシー ポリシー
YouTube
YouTube はビデオ共有プラットフォームで、埋め込まれたビデオを当社のウェブ サイトで表示および共有することができます。YouTube は、視聴者のビデオのパフォーマンスの測定値を提供しています。 YouTube 社のプライバシー ポリシー

icon-svg-hide-thick

icon-svg-show-thick

広告表示をカスタマイズ:お客様に関連する広告が表示されます

Adobe Analytics
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Adobe Analyticsを利用しています。収集する情報には、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Adobe Analytics プライバシー ポリシー
Google Analytics (Web Analytics)
弊社は、弊社サイトでのお客様の行動に関するデータを収集するために、Google Analytics (Web Analytics)を利用しています。データには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。このデータを基にサイトのパフォーマンスを測定したり、オンラインでの操作のしやすさを検証して機能強化に役立てています。併せて高度な解析手法を使用し、メールでのお問い合わせやカスタマー サポート、営業へのお問い合わせで、お客様に最適な体験が提供されるようにしています。. Google Analytics (Web Analytics) プライバシー ポリシー<>
Marketo
弊社は、お客様に関連性のあるコンテンツを、適切なタイミングにメールで配信できるよう、Marketoを利用しています。そのため、お客様のオンラインでの行動や、弊社からお送りするメールへの反応について、データを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、メールの開封率、クリックしたリンクなどが含まれます。このデータに、他の収集先から集めたデータを組み合わせ、営業やカスタマー サービスへの満足度を向上させるとともに、高度な解析処理によって、より関連性の高いコンテンツを提供するようにしています。. Marketo プライバシー ポリシー
Doubleclick
弊社は、Doubleclickがサポートするサイトに広告を配置するために、Doubleclickを利用しています。広告には、Doubleclickのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Doubleclickがお客様から収集したデータを使用する場合があります。Doubleclickに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Doubleclick プライバシー ポリシー
HubSpot
弊社は、お客様に関連性のあるコンテンツを、適切なタイミングにメールで配信できるよう、HubSpotを利用しています。そのため、お客様のオンラインでの行動や、弊社からお送りするメールへの反応について、データを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、メールの開封率、クリックしたリンクなどが含まれます。. HubSpot プライバシー ポリシー
Twitter
弊社は、Twitterがサポートするサイトに広告を配置するために、Twitterを利用しています。広告には、Twitterのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Twitterがお客様から収集したデータを使用する場合があります。Twitterに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Twitter プライバシー ポリシー
Facebook
弊社は、Facebookがサポートするサイトに広告を配置するために、Facebookを利用しています。広告には、Facebookのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Facebookがお客様から収集したデータを使用する場合があります。Facebookに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Facebook プライバシー ポリシー
LinkedIn
弊社は、LinkedInがサポートするサイトに広告を配置するために、LinkedInを利用しています。広告には、LinkedInのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、LinkedInがお客様から収集したデータを使用する場合があります。LinkedInに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. LinkedIn プライバシー ポリシー
Yahoo! Japan
弊社は、Yahoo! Japanがサポートするサイトに広告を配置するために、Yahoo! Japanを利用しています。広告には、Yahoo! Japanのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Yahoo! Japanがお客様から収集したデータを使用する場合があります。Yahoo! Japanに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Yahoo! Japan プライバシー ポリシー
Naver
弊社は、Naverがサポートするサイトに広告を配置するために、Naverを利用しています。広告には、Naverのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Naverがお客様から収集したデータを使用する場合があります。Naverに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Naver プライバシー ポリシー
Quantcast
弊社は、Quantcastがサポートするサイトに広告を配置するために、Quantcastを利用しています。広告には、Quantcastのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Quantcastがお客様から収集したデータを使用する場合があります。Quantcastに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Quantcast プライバシー ポリシー
Call Tracking
弊社は、キャンペーン用にカスタマイズした電話番号を提供するために、Call Trackingを利用しています。カスタマイズした電話番号を使用することで、お客様は弊社の担当者にすぐ連絡できるようになり、弊社はサービスのパフォーマンスをより正確に評価できるようになります。弊社では、提供した電話番号を基に、サイトでのお客様の行動に関するデータを収集する場合があります。. Call Tracking プライバシー ポリシー
Wunderkind
弊社は、Wunderkindがサポートするサイトに広告を配置するために、Wunderkindを利用しています。広告には、Wunderkindのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Wunderkindがお客様から収集したデータを使用する場合があります。Wunderkindに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Wunderkind プライバシー ポリシー
ADC Media
弊社は、ADC Mediaがサポートするサイトに広告を配置するために、ADC Mediaを利用しています。広告には、ADC Mediaのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、ADC Mediaがお客様から収集したデータを使用する場合があります。ADC Mediaに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. ADC Media プライバシー ポリシー
AgrantSEM
弊社は、AgrantSEMがサポートするサイトに広告を配置するために、AgrantSEMを利用しています。広告には、AgrantSEMのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、AgrantSEMがお客様から収集したデータを使用する場合があります。AgrantSEMに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. AgrantSEM プライバシー ポリシー
Bidtellect
弊社は、Bidtellectがサポートするサイトに広告を配置するために、Bidtellectを利用しています。広告には、Bidtellectのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Bidtellectがお客様から収集したデータを使用する場合があります。Bidtellectに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Bidtellect プライバシー ポリシー
Bing
弊社は、Bingがサポートするサイトに広告を配置するために、Bingを利用しています。広告には、Bingのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Bingがお客様から収集したデータを使用する場合があります。Bingに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Bing プライバシー ポリシー
G2Crowd
弊社は、G2Crowdがサポートするサイトに広告を配置するために、G2Crowdを利用しています。広告には、G2Crowdのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、G2Crowdがお客様から収集したデータを使用する場合があります。G2Crowdに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. G2Crowd プライバシー ポリシー
NMPI Display
弊社は、NMPI Displayがサポートするサイトに広告を配置するために、NMPI Displayを利用しています。広告には、NMPI Displayのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、NMPI Displayがお客様から収集したデータを使用する場合があります。NMPI Displayに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. NMPI Display プライバシー ポリシー
VK
弊社は、VKがサポートするサイトに広告を配置するために、VKを利用しています。広告には、VKのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、VKがお客様から収集したデータを使用する場合があります。VKに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. VK プライバシー ポリシー
Adobe Target
弊社はAdobe Targetを利用して、弊社サイトの新機能をテストし、お客様に合わせた方法で機能を使えるようにしています。そのため弊社では、弊社サイトにアクセスしているお客様から、行動に関するデータを収集しています。収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID、お客様の Autodesk ID などが含まれます。機能のテストの結果によっては、お客様がご利用のサイトのバージョンが変わったり、サイトにアクセスするユーザの属性に応じて、パーソナライズされたコンテンツが表示されるようになる場合があります。. Adobe Target プライバシー ポリシー
Google Analytics (Advertising)
弊社は、Google Analytics (Advertising)がサポートするサイトに広告を配置するために、Google Analytics (Advertising)を利用しています。広告には、Google Analytics (Advertising)のデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Google Analytics (Advertising)がお客様から収集したデータを使用する場合があります。Google Analytics (Advertising)に提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Google Analytics (Advertising) プライバシー ポリシー
Trendkite
弊社は、Trendkiteがサポートするサイトに広告を配置するために、Trendkiteを利用しています。広告には、Trendkiteのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Trendkiteがお客様から収集したデータを使用する場合があります。Trendkiteに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Trendkite プライバシー ポリシー
Hotjar
弊社は、Hotjarがサポートするサイトに広告を配置するために、Hotjarを利用しています。広告には、Hotjarのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Hotjarがお客様から収集したデータを使用する場合があります。Hotjarに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Hotjar プライバシー ポリシー
6 Sense
弊社は、6 Senseがサポートするサイトに広告を配置するために、6 Senseを利用しています。広告には、6 Senseのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、6 Senseがお客様から収集したデータを使用する場合があります。6 Senseに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. 6 Sense プライバシー ポリシー
Terminus
弊社は、Terminusがサポートするサイトに広告を配置するために、Terminusを利用しています。広告には、Terminusのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、Terminusがお客様から収集したデータを使用する場合があります。Terminusに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. Terminus プライバシー ポリシー
StackAdapt
弊社は、StackAdaptがサポートするサイトに広告を配置するために、StackAdaptを利用しています。広告には、StackAdaptのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、StackAdaptがお客様から収集したデータを使用する場合があります。StackAdaptに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. StackAdapt プライバシー ポリシー
The Trade Desk
弊社は、The Trade Deskがサポートするサイトに広告を配置するために、The Trade Deskを利用しています。広告には、The Trade Deskのデータと、弊社サイトにアクセスしているお客様から弊社が収集する行動に関するデータの両方が使われます。弊社が収集するデータには、お客様がアクセスしたページ、ご利用中の体験版、再生したビデオ、購入した製品やサービス、お客様の IP アドレスまたはデバイスの ID が含まれます。この情報に併せて、The Trade Deskがお客様から収集したデータを使用する場合があります。The Trade Deskに提供しているデータを弊社が使用するのは、お客様のデジタル広告体験をより適切にカスタマイズし、関連性の高い広告をお客様に配信するためです。. The Trade Desk プライバシー ポリシー
RollWorks
We use RollWorks to deploy digital advertising on sites supported by RollWorks. Ads are based on both RollWorks data and behavioral data that we collect while you’re on our sites. The data we collect may include pages you’ve visited, trials you’ve initiated, videos you’ve played, purchases you’ve made, and your IP address or device ID. This information may be combined with data that RollWorks has collected from you. We use the data that we provide to RollWorks to better customize your digital advertising experience and present you with more relevant ads. RollWorks Privacy Policy

オンライン体験の品質向上にぜひご協力ください

オートデスクは、弊社の製品やサービスをご利用いただくお客様に、優れた体験を提供することを目指しています。これまでの画面の各項目で[はい]を選択したお客様については、弊社でデータを収集し、カスタマイズされた体験の提供とアプリケーションの品質向上に役立てさせていただきます。この設定は、プライバシー ステートメントにアクセスすると、いつでも変更できます。

お客様の顧客体験は、お客様が自由に決められます。

オートデスクはお客様のプライバシーを尊重します。オートデスクでは収集したデータを基に、お客様が弊社製品をどのように利用されているのか、お客様が関心を示しそうな情報は何か、オートデスクとの関係をより価値あるものにするには、どのような改善が可能かを理解するよう務めています。

そこで、お客様一人ひとりに合わせた体験を提供するために、お客様のデータを収集し、使用することを許可いただけるかどうかお答えください。

体験をカスタマイズすることのメリットにつきましては、本サイトのプライバシー設定の管理でご確認いただけます。弊社のプライバシー ステートメントでも、選択肢について詳しく説明しております。