AU Class
AU Class
class - AU

Getting Started with Simulation in Fusion 360: The Basics

共享此课程
在视频、演示文稿幻灯片和讲义中搜索关键字:

说明

Simulation lets designers test (simulate) their designs before reaching the manufacturing process. This enables iterative changes without the time and money (and potential waste) that can go into making a product only to find it doesn't meet the standards needed. The Simulation workspace in Fusion 360 software can feel a little intimidating at first glance—with so many options to choose from. This class will take you through the basic steps of a static stress simulation, showing you how to set up a simulation in detail, what all the options are for, and how the results can be analyzed and used to influence future design decisions. You will leave this class feeling more confident and ready to improve your whole design process!

主要学习内容

  • Learn about how Simulation can be used in a design workflow
  • Learn how to set up a static stress simulation
  • Learn about the options and process
  • Explore the results of a simulation and how to use them in your design

讲师

  • Elizabeth Bishop 的头像
    Elizabeth Bishop
    I am a Maker, Baker and Tinkerer loving all things 3D Printed. My PhD was in Large-Scale Additive Manufacturing (3D Printing), improving the technology. I've been interested in 3D printing for several years now and I am a Maker in Residence in the Engineering Build Space at Warwick University where I am exploring making, CAD and CAM alongside 3D printing. Twitter - @DrLizBish LinkedIn - Elizabeth Bishop
Video Player is loading.
Current Time 0:00
Duration 0:00
Loaded: 0%
Stream Type LIVE
Remaining Time 0:00
 
1x
  • Chapters
  • descriptions off, selected
  • subtitles off, selected
      Transcript

      ELIZABETH BISHOP: Hello. Thanks for joining my class today, Getting Started with Simulation in Fusion 360, The Basics. I'll start with a little bit about me. My name is Liz or Elizabeth Bishop, and I did my undergraduate degree in mechanical engineering at the University of Warwick in the UK. And you might recognize me from the UAV project that we did that was on display in AU London and AU Vegas a couple of years ago. And I am now doing a PhD in Large-Scale Additive Manufacturing hoping to finish that up very soon.

      I'm also a maker in residence at the University of Warwick's Build Space, so our Maker's Bay, which is a student teaching space where we've got various different 3D printers, CNC machines, and I get involved in a lot of making. You can find my social media down there at the bottom, and you can also follow the Engineering Build Space on there.

      But that's not what today is about. Today is about you and learning how to use the simulation workspace in Fusion. So we're going to go through why you might want to use simulation and how it can help you in your design workflow. And then we'll head into Fusion and set up a static stress simulation. We'll go through all the different options, what they mean, and why you might want to use them. And then finally, we'll have a look at our results and how we can use those to influence our design.

      So why do we want to use simulation? Simulation is really useful as a design tool. A lot of people just use it to kind of prove their point at the end, and it's kind of like, well, what was really the point of doing that? You really should be using it inside your design process.

      So you might have an idea about something that you want to make. And then we go into Fusion. We design that idea. And then we build it. So we manufacture it. And then it doesn't work. And you might have done some quick calculations for that, but it's not always easy to do the calculations on a really complex model.

      This is where simulation comes in. So we have that idea. We design it in Fusion, and then we simulate it. And we get those results as if it was in real life, as if we'd already made it. And we can use those results to influence our design. And we can go back. We can make changes to our design. We can resimulate that. We might need to go through that process various different times in a cycle. And then we can manufacture our part. We can build it, print it, machine it, whatever it is you're making. And then, hopefully, we'll have a successful part.

      Inside the Simulation Workspace in Fusion, there are loads of different options. Today, we're just going to be looking at static stress, the most basic form of a simulation. If you want to use various different ones, there is loads of help online, and you can also click the Help Me Choose a Study Type if you're not too sure what you want to do.

      If you've got any questions about anything that we've gone through today, please do post them in the class page in the discussion. I'll be answering questions on that throughout the whole of AU, and you can reach out to me on my social media. And there'll also be a live Q&A for this session. So please come along to that if you've got any questions or just want to find out a little bit more about the Simulation Workspace.

      So let's take a look at static stress in Fusion 360. We're going to have a look at two examples today. So the first one we're going to have a look at is a spanner or wrench, and the second one is a 3D-printed spice shelf bracket that I made. So let's head into Fusion and have a look at the spanner first.

      So we're inside Fusion 360 here, and I've opened up a file that I have prepared for this class. So this is Spanner No Fillet, and you can find this on my class page. If you've ever used Fusion 360, you can upload your files using the Upload button here. And then to open a file, double click on it in the data panel. And then you can just close the data panel using this tool here.

      When you first open a file, you always are in the design workspace. And for this session, we're going to move from our design workspace into the simulation workspace. And this is where we're going to perform any simulation you might want to do on your part. So click on Design and go to Simulation there. And you can see that the things along the top change a little bit.

      When you first go from design to simulation, you get this new study box pop up here. And I showed this in the presentation just before. So we are going to choose a static stress simulation for this one. So we just want a very basic simulation. And each one of these has, if you click on it, it'll show you a little bit about what it is about. And you can also use that Help Me Choose a Study Type if you're not sure what it is you want to do.

      So if you click on Static Stress and then Create Study, that takes us into the study space for this part. And with the simulation in Fusion, it's really good. It usually guides you through what you want to do. So we're going to work from left to right across the top bar. We're not going to use the simplified workspace. I'll show you what that does in a moment. So we'll start with our materials.

      So this is where you want to set the material that you're using for the simulation. So you might want to simulate various different materials if you're not sure what material you're going to use. In this case, this spanner, this wrench that we're going to simulate, we're going to just leave it as same as model, which is steel.

      If you did want to change that, we just use the dropdown, and then you can click on whatever material you want to use. Fusion has got loads of built-in materials so you can use those. And also, you can create your own materials if the one that you want to use doesn't exist. So click OK on that.

      The next thing we want to do is apply the constraints. In this case, we're going to use a fixed constraint. So think about the operation of a spanner. These two faces here would be fixed around a nut as you push on the spanner. So we're going to use a fixed constraint, but there are different options that you can choose from, depending on what you're going to be simulating.

      And these axes down here, at the moment, all of them are fully fixed, but say you wanted it to move in one particular direction. You could remove that constraint, and then it would allow the movement in that axis. But as I said, in this case, we want it to be fully constrained. So we click OK with that.

      The next one along is the load. So we're going to apply a structural load. And we're going to apply it to this face here. I created a split face on the spanner here so that it's just applied to the end half as if you're pushing this spanner around to tighten a nut. And again, we're just going to use the force for this one, but there are different options that you can use depending on what you're trying to simulate and work out.

      So we're going to apply a force to the one face, and we're going to apply an angle force in this case rather than a direction one. And we're going to leave them all at zero, and we're going to apply a force with a magnitude of 500 Newtons. And if you're working in America, say, you want to change the units, you can click on this Change Units here, and it gives you the option of the different units that you can use. I tend to work in Newtons all the time so I don't generally change that all that often. But if you need to, you can do.

      If you did want to change the angle at which you are applying that force, you can use these pull sections here to do that, or you can change them in the numbers here. So say you were applying that force slightly angled. You can do that. Or you wanted to see what would happen if someone pushed the spanner downwards instead of directly perpendicular to the nut. But we'll leave those at 0 for now, and then click OK.

      Next up, along the top is Contacts. So we don't actually need to use contacts for this particular study because we just got one single object. But if you were doing a simulation of an assembly, you might need to apply automatic contacts between the faces of two different objects so that we know that they can move into each other.

      The Display is just how the part is appearing. So you can use this to view the mesh. So the mesh in a study is the number of points at which it's going to do the calculations for that study. In this case, we're not going to generate a mesh before we study it, but it will be created when you do the study.

      In the Manage tab, these are just the settings that you've got for the study and various different things you can choose. And again, you can do different options for the mesh. There's advanced studies once you start getting into very complex models, and you can also use adaptive mesh refinement if you want to do some very complex things. We're just going to use the defaults for this study here. And you can also change local mesh control. So you can apply a smaller mesh in an area, and you can edit the load case attributes.

      Next up, we've got this really handy Pre-Check bit here. So this tells us have we remembered to do everything to set up our study. So have you remembered to put a constraint in? Have you remembered to put a load in? So everything is ready there, and we can hit the Solve button.

      I'm going to solve everything on the cloud here, and the really great thing about Fusion is that it does have this on-cloud study. So you can set up your study, press Solve, go away. You can even turn your computer off, and it sits in the background in the cloud solving that study for you.

      That's really good because it means you don't need to use your computing power to do that. And also, you can solve multiple simulations at the same time without waiting for the results to come back. So I'm going to hit Solve study, and it will just take a few minutes to come back with the result.

      When you press Solve, it jumps first to this job status bar, and you can see how that is progressing. So we can see that it's being sent to the cloud so that's complete. And it's now scheduled and has been started to solve. If you close that and want to check on the status of your study, you can click on the Solve Study bar at the top, and that reopens that bar there. And we can see as this is a really basic simulation, we've got our study back already. So we can click Close, and we can review our results.

      So the default view option of our results is, first of all, the safety factor. So engineers use a safety factor to check that apart is sufficiently good enough for the job that you're looking at. So you usually want to have a safety factor of two, but things like aerospace specify you need a higher safety factor for different things.

      We can change what we're looking at by using the dropdown here. So we can view the stress, the displacement, the reaction force, and the strain. So let's have a look at the displacement. So this is how much the part moves as a result of that force that we've applied to it. And we can see we've got the minimum zero where it's fully constrained so that's what we'd be expecting, and we can see we've got a maximum of 0.43 millimeters.

      Now, having a look at that there, that displacement that it's showing us there looks a lot more than 0.43 millimeters, and that's because our deformation scale is an adjusted scale so that you can see what's going on. We can change that to an undeformed scale, and you can see that you can barely see that deformation there. So just to be aware that that is something that happens, and it shows that with different scales. So let's go back to an adjusted scale, and we can see different ones there. So the one times adjusted at the top there is quite a good one to have a look at.

      Going back to our bar along the top for our results, let's have a look at what else we can do with our results. So on this first one, we can animate our results. So I like to do a two-way animation. And we can press Play, and you can see the displacement over time. Let's take a look at the stress for that one.

      So if we animate that two-way and click Play, and you can see how the stress in the part changes as that force is applied and taken away. And we can see that the maximum is up here around there. I think it might be somewhere in the middle of the part. So let's see if we can find out where that is.

      So we can use these inspection tools. So we've got the Hide Min and Max. So those are those points that are showing there. I tend to have those on to see where our minimum and maximum stresses are. And we can create a surface probe. So surface probe can be run over the surface at any point on that surface to find out what the stress is. And we can see that it's really quite high around this area here but still not that maximum point there.

      So what we need to do is to create a slice plane to have a look inside the part. You can click on any flat surface and drag that inside so we can try and find out where that maximum stress is inside the part. I think that might be on the other side actually that point, but let's take a look at the inside of the part. And this time we want to use a point probe.

      So point probe can be run over, but it will also run over the inside of the part as well. So we can take a look at those points there, and it will tell us the XYZ coordinates of exactly what that stress is at that point. So that's a really useful tool if you're looking to do that. And we can leave that on or delete those. And if you ever want to just delete all of it, we can just go Delete All Probes, or you can hide them if you want them for later.

      Another useful tool that we've got up here is creating a report. So you can click Create Report, and these are the different options that you can have in that report. And it will create you a report that you can share with your teammates, and you can view that online. So if we click Preview, and that study report opens online, and you can see what you set up, the settings you used for it, your mesh settings, the materials you chose, and the load cases you put on.

      And then it gives you a full breakdown of all the results from that, the different stresses and safety factors and all of that. And then we also get those views that we've got of all the different results with that split plane that we had on. If you want to remove that split plane and have the results full, you can just click on the plane and click Delete, and then we get a full view with those results.

      So you might want to take the results of this and maybe add some fillets and try and reduce the stress around those areas where it's really high. So you could just go back into the design workspace. You could maybe add some fillets using the fillet tool. So you might want to fillet the top and bottom and maybe a one millimeter fillet. And again, you might maybe want to add some fillets around here. And then you could go back into the simulation workspace and resimulate that part.

      So next example we're going to have a look at is a spice shelf bracket. So before we do that, I'm going to do a few quick calculations to work out what load we need to add to that bracket so that we can simulate it. So this is a spice shelf that I made. I like to do quite a lot of baking as you can see. I got quite a lot of spices there. If you want to check out any of my baking, you can find me on Instagram @bishskitchen on there.

      Anyway, back to the calculations. So in order to work out the load that I needed to apply, I weighed one full spice jar, which was 150 grams. And then I counted up all the spice jars that I had, which was 35. Yes, I know that's quite a lot. So anyway, 150 by 35 gives us 5,250 grams. Putting that to kilos gives us 5.25 kilos, and I thought just to be safe in case I buy any more spices, I should round that up to 6 kilos.

      So to find the force that we want to apply for that bracket, we take our 6 kilos times it by gravity, which is approximately 10, which gives us 60 Newtons. Now, this is a very sort of napkin calculation, a bit quick. In an engineering scenario, you might want to take a little bit more time and work out various different loads. But it's a very quick calculation. It'll give us a rough idea of have we got it right or not. So let's head into Fusion and see how that turns out.

      So back into Fusion and we're going to have a look at that spice shelf bracket that I made. So let's go from the design workspace into the simulation workspace. I'm going to choose our study type as static stress, same as before. And you can see here that I actually have modeled the wall and the bracket. So this is because I wanted to show you the simplified workspace here.

      So the first choice after Study is Simplify. We can click on that. And what we can do in here is you can simplify your model. So if you've got a complex assembly, it's got lots of nuts and bolts, which aren't going to affect your simulation that much, you can remove them, and it means your simulation will resolve a lot faster.

      So what we can do is click on the shelf and click Remove and the same with the wall and remove. And that means in our simulation workspace, we're just working with the bracket. But if we went back to our design, it would still have all those other components. So it's a really useful tool if you want to simplify anything, make your simulation quicker to solve and a little bit more simple to work with. So when we're done with that, we can click Finish Simplify.

      Same as before, we're going to work from left to right across the top. So we start with our materials. Now, I 3D printed these in PLA, but we're going to use ABS as that's a built-in plastic in Fusion and click OK. We want to apply our constraints. So I'm going to use that fixed constraint again, and I'm going to fix the back piece against the wall as if it's fixed solidly to the wall. It's not a completely 100% accurate representation of what goes on, but it will give us a good idea about what's going to happen with our bracket.

      And then we want to apply our load. So we click on Load, and this time, it's going to be on that top face there, and I'm going to use that normal load there instead of the angle one like we used on the spanner. And that magnitude that we just calculated is the 60 Newtons. I'm going to leave that as Newtons and click OK.

      We don't need any contacts as it's a single part again, and we can click on the Pre-Check to make sure we've got everything set up, ready to go, which we have so we can click OK. And then we can solve that on the cloud. So I'm doing a cloud simulation. It's going to cost five credits, and I'm going to click Solve One Study. I'm going to leave that solving there.

      And we've got our results, and we can see that we've got that safety factor similar to what we had on the spanner. Let's take a look at the displacement. Now, this is showing a 1.582 millimeter displacement. I think that's going to be quite a lot for my spice shelf. Let's have a look at what that actually looks like. Yeah you can really see that visible deformation. I think all the spice jars might fall off the shelf if I leave it like that.

      So let's take a look at a little bit of a different design. So I muddled up a second version, which has a cross bracing inside the inside of the part. So we've got that here with this cross bracing. Let's set up exactly the same simulation and see how that comes out. So from the design workspace to the simulation workspace, and choose a static stress. And we want to use the same simplify as we did before. So in the simplify workspace, I'm just going to remove the shelf and the wall, which leaves us just with the bracket.

      Static stress, set the materials. Constraints is going to be fixed on that face, and the load is the 60 Newtons across the top. We've got everything ready, and we can solve that on the cloud. We've got our results. Let's compare the displacement with those two parts there. Yes, we can see that the displacement is over a millimeter less. Let's look at that with the actual deformation. There's still a little bit of displacement, but I think that will probably be OK for the part.

      So we've got our two results there. We can see that we've got the 1.58 on the one without the cross brace and the 0.5887 there. And this was the design that I actually went with, the one with the cross brace here. So I printed three of these on my 3D printer with PLA and set that up with a shelf in my kitchen. And so far, I've had no accidents with spice jars. So fingers crossed, it'll hold out for much longer.

      So hopefully, you found today interesting. Just to go over what we've done, so we have learned how you can use simulation in your design workflow and why you might want to. So you don't want those parts to fail, and you can use that simulation as a tool before you build your part to check that it's going to work.

      We've learnt how to set up a static stress simulation using the spanner and the shelf bracket as an example and what options to use and why you might want to choose them. And as I showed with the shelf bracket, you can see how you might use those results of the simulation to influence your design. So we added that cross brace to reduce the deformation of that spice shelf bracket.

      So hopefully, you found that interesting and that you have learned a little bit about the static stress area in the simulation workspace and know how to use that now. If you want any more, then please reach out on my speaker page. You can leave a comment, ask a question on that class page. And if you liked it, please give it a thumbs up, recommend it, and you can also reach out on my social media. So thank you very much for joining me today, and I hope you enjoy the rest of AU.

      ______
      icon-svg-close-thick

      Cookie 首选项

      您的隐私对我们非常重要,为您提供出色的体验是我们的责任。为了帮助自定义信息和构建应用程序,我们会收集有关您如何使用此站点的数据。

      我们是否可以收集并使用您的数据?

      详细了解我们使用的第三方服务以及我们的隐私声明

      绝对必要 – 我们的网站正常运行并为您提供服务所必需的

      通过这些 Cookie,我们可以记录您的偏好或登录信息,响应您的请求或完成购物车中物品或服务的订购。

      改善您的体验 – 使我们能够为您展示与您相关的内容

      通过这些 Cookie,我们可以提供增强的功能和个性化服务。可能由我们或第三方提供商进行设置,我们会利用其服务为您提供定制的信息和体验。如果您不允许使用这些 Cookie,可能会无法使用某些或全部服务。

      定制您的广告 – 允许我们为您提供针对性的广告

      这些 Cookie 会根据您的活动和兴趣收集有关您的数据,以便向您显示相关广告并跟踪其效果。通过收集这些数据,我们可以更有针对性地向您显示与您的兴趣相关的广告。如果您不允许使用这些 Cookie,您看到的广告将缺乏针对性。

      icon-svg-close-thick

      第三方服务

      详细了解每个类别中我们所用的第三方服务,以及我们如何使用所收集的与您的网络活动相关的数据。

      icon-svg-hide-thick

      icon-svg-show-thick

      绝对必要 – 我们的网站正常运行并为您提供服务所必需的

      Qualtrics
      我们通过 Qualtrics 借助调查或联机表单获得您的反馈。您可能会被随机选定参与某项调查,或者您可以主动向我们提供反馈。填写调查之前,我们将收集数据以更好地了解您所执行的操作。这有助于我们解决您可能遇到的问题。. Qualtrics 隐私政策
      Akamai mPulse
      我们通过 Akamai mPulse 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Akamai mPulse 隐私政策
      Digital River
      我们通过 Digital River 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Digital River 隐私政策
      Dynatrace
      我们通过 Dynatrace 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Dynatrace 隐私政策
      Khoros
      我们通过 Khoros 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Khoros 隐私政策
      Launch Darkly
      我们通过 Launch Darkly 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Launch Darkly 隐私政策
      New Relic
      我们通过 New Relic 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. New Relic 隐私政策
      Salesforce Live Agent
      我们通过 Salesforce Live Agent 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Salesforce Live Agent 隐私政策
      Wistia
      我们通过 Wistia 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Wistia 隐私政策
      Tealium
      我们通过 Tealium 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Tealium 隐私政策
      Upsellit
      我们通过 Upsellit 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Upsellit 隐私政策
      CJ Affiliates
      我们通过 CJ Affiliates 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. CJ Affiliates 隐私政策
      Commission Factory
      我们通过 Commission Factory 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Commission Factory 隐私政策
      Google Analytics (Strictly Necessary)
      我们通过 Google Analytics (Strictly Necessary) 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Google Analytics (Strictly Necessary) 隐私政策
      Typepad Stats
      我们通过 Typepad Stats 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Typepad Stats 隐私政策
      Geo Targetly
      我们使用 Geo Targetly 将网站访问者引导至最合适的网页并/或根据他们的位置提供量身定制的内容。 Geo Targetly 使用网站访问者的 IP 地址确定访问者设备的大致位置。 这有助于确保访问者以其(最有可能的)本地语言浏览内容。Geo Targetly 隐私政策
      SpeedCurve
      我们使用 SpeedCurve 来监控和衡量您的网站体验的性能,具体因素为网页加载时间以及后续元素(如图像、脚本和文本)的响应能力。SpeedCurve 隐私政策
      Qualified
      Qualified is the Autodesk Live Chat agent platform. This platform provides services to allow our customers to communicate in real-time with Autodesk support. We may collect unique ID for specific browser sessions during a chat. Qualified Privacy Policy

      icon-svg-hide-thick

      icon-svg-show-thick

      改善您的体验 – 使我们能够为您展示与您相关的内容

      Google Optimize
      我们通过 Google Optimize 测试站点上的新功能并自定义您对这些功能的体验。为此,我们将收集与您在站点中的活动相关的数据。此数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID 等。根据功能测试,您可能会体验不同版本的站点;或者,根据访问者属性,您可能会查看个性化内容。. Google Optimize 隐私政策
      ClickTale
      我们通过 ClickTale 更好地了解您可能会在站点的哪些方面遇到困难。我们通过会话记录来帮助了解您与站点的交互方式,包括页面上的各种元素。将隐藏可能会识别个人身份的信息,而不会收集此信息。. ClickTale 隐私政策
      OneSignal
      我们通过 OneSignal 在 OneSignal 提供支持的站点上投放数字广告。根据 OneSignal 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 OneSignal 收集的与您相关的数据相整合。我们利用发送给 OneSignal 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. OneSignal 隐私政策
      Optimizely
      我们通过 Optimizely 测试站点上的新功能并自定义您对这些功能的体验。为此,我们将收集与您在站点中的活动相关的数据。此数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID 等。根据功能测试,您可能会体验不同版本的站点;或者,根据访问者属性,您可能会查看个性化内容。. Optimizely 隐私政策
      Amplitude
      我们通过 Amplitude 测试站点上的新功能并自定义您对这些功能的体验。为此,我们将收集与您在站点中的活动相关的数据。此数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID 等。根据功能测试,您可能会体验不同版本的站点;或者,根据访问者属性,您可能会查看个性化内容。. Amplitude 隐私政策
      Snowplow
      我们通过 Snowplow 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Snowplow 隐私政策
      UserVoice
      我们通过 UserVoice 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. UserVoice 隐私政策
      Clearbit
      Clearbit 允许实时数据扩充,为客户提供个性化且相关的体验。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。Clearbit 隐私政策
      YouTube
      YouTube 是一个视频共享平台,允许用户在我们的网站上查看和共享嵌入视频。YouTube 提供关于视频性能的观看指标。 YouTube 隐私政策

      icon-svg-hide-thick

      icon-svg-show-thick

      定制您的广告 – 允许我们为您提供针对性的广告

      Adobe Analytics
      我们通过 Adobe Analytics 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Adobe Analytics 隐私政策
      Google Analytics (Web Analytics)
      我们通过 Google Analytics (Web Analytics) 收集与您在我们站点中的活动相关的数据。这可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。我们使用此数据来衡量我们站点的性能并评估联机体验的难易程度,以便我们改进相关功能。此外,我们还将使用高级分析方法来优化电子邮件体验、客户支持体验和销售体验。. Google Analytics (Web Analytics) 隐私政策
      AdWords
      我们通过 AdWords 在 AdWords 提供支持的站点上投放数字广告。根据 AdWords 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 AdWords 收集的与您相关的数据相整合。我们利用发送给 AdWords 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. AdWords 隐私政策
      Marketo
      我们通过 Marketo 更及时地向您发送相关电子邮件内容。为此,我们收集与以下各项相关的数据:您的网络活动,您对我们所发送电子邮件的响应。收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、电子邮件打开率、单击的链接等。我们可能会将此数据与从其他信息源收集的数据相整合,以根据高级分析处理方法向您提供改进的销售体验或客户服务体验以及更相关的内容。. Marketo 隐私政策
      Doubleclick
      我们通过 Doubleclick 在 Doubleclick 提供支持的站点上投放数字广告。根据 Doubleclick 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Doubleclick 收集的与您相关的数据相整合。我们利用发送给 Doubleclick 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Doubleclick 隐私政策
      HubSpot
      我们通过 HubSpot 更及时地向您发送相关电子邮件内容。为此,我们收集与以下各项相关的数据:您的网络活动,您对我们所发送电子邮件的响应。收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、电子邮件打开率、单击的链接等。. HubSpot 隐私政策
      Twitter
      我们通过 Twitter 在 Twitter 提供支持的站点上投放数字广告。根据 Twitter 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Twitter 收集的与您相关的数据相整合。我们利用发送给 Twitter 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Twitter 隐私政策
      Facebook
      我们通过 Facebook 在 Facebook 提供支持的站点上投放数字广告。根据 Facebook 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Facebook 收集的与您相关的数据相整合。我们利用发送给 Facebook 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Facebook 隐私政策
      LinkedIn
      我们通过 LinkedIn 在 LinkedIn 提供支持的站点上投放数字广告。根据 LinkedIn 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 LinkedIn 收集的与您相关的数据相整合。我们利用发送给 LinkedIn 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. LinkedIn 隐私政策
      Yahoo! Japan
      我们通过 Yahoo! Japan 在 Yahoo! Japan 提供支持的站点上投放数字广告。根据 Yahoo! Japan 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Yahoo! Japan 收集的与您相关的数据相整合。我们利用发送给 Yahoo! Japan 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Yahoo! Japan 隐私政策
      Naver
      我们通过 Naver 在 Naver 提供支持的站点上投放数字广告。根据 Naver 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Naver 收集的与您相关的数据相整合。我们利用发送给 Naver 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Naver 隐私政策
      Quantcast
      我们通过 Quantcast 在 Quantcast 提供支持的站点上投放数字广告。根据 Quantcast 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Quantcast 收集的与您相关的数据相整合。我们利用发送给 Quantcast 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Quantcast 隐私政策
      Call Tracking
      我们通过 Call Tracking 为推广活动提供专属的电话号码。从而,使您可以更快地联系我们的支持人员并帮助我们更精确地评估我们的表现。我们可能会通过提供的电话号码收集与您在站点中的活动相关的数据。. Call Tracking 隐私政策
      Wunderkind
      我们通过 Wunderkind 在 Wunderkind 提供支持的站点上投放数字广告。根据 Wunderkind 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Wunderkind 收集的与您相关的数据相整合。我们利用发送给 Wunderkind 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Wunderkind 隐私政策
      ADC Media
      我们通过 ADC Media 在 ADC Media 提供支持的站点上投放数字广告。根据 ADC Media 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 ADC Media 收集的与您相关的数据相整合。我们利用发送给 ADC Media 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. ADC Media 隐私政策
      AgrantSEM
      我们通过 AgrantSEM 在 AgrantSEM 提供支持的站点上投放数字广告。根据 AgrantSEM 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 AgrantSEM 收集的与您相关的数据相整合。我们利用发送给 AgrantSEM 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. AgrantSEM 隐私政策
      Bidtellect
      我们通过 Bidtellect 在 Bidtellect 提供支持的站点上投放数字广告。根据 Bidtellect 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Bidtellect 收集的与您相关的数据相整合。我们利用发送给 Bidtellect 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Bidtellect 隐私政策
      Bing
      我们通过 Bing 在 Bing 提供支持的站点上投放数字广告。根据 Bing 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Bing 收集的与您相关的数据相整合。我们利用发送给 Bing 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Bing 隐私政策
      G2Crowd
      我们通过 G2Crowd 在 G2Crowd 提供支持的站点上投放数字广告。根据 G2Crowd 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 G2Crowd 收集的与您相关的数据相整合。我们利用发送给 G2Crowd 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. G2Crowd 隐私政策
      NMPI Display
      我们通过 NMPI Display 在 NMPI Display 提供支持的站点上投放数字广告。根据 NMPI Display 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 NMPI Display 收集的与您相关的数据相整合。我们利用发送给 NMPI Display 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. NMPI Display 隐私政策
      VK
      我们通过 VK 在 VK 提供支持的站点上投放数字广告。根据 VK 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 VK 收集的与您相关的数据相整合。我们利用发送给 VK 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. VK 隐私政策
      Adobe Target
      我们通过 Adobe Target 测试站点上的新功能并自定义您对这些功能的体验。为此,我们将收集与您在站点中的活动相关的数据。此数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID、您的 Autodesk ID 等。根据功能测试,您可能会体验不同版本的站点;或者,根据访问者属性,您可能会查看个性化内容。. Adobe Target 隐私政策
      Google Analytics (Advertising)
      我们通过 Google Analytics (Advertising) 在 Google Analytics (Advertising) 提供支持的站点上投放数字广告。根据 Google Analytics (Advertising) 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Google Analytics (Advertising) 收集的与您相关的数据相整合。我们利用发送给 Google Analytics (Advertising) 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Google Analytics (Advertising) 隐私政策
      Trendkite
      我们通过 Trendkite 在 Trendkite 提供支持的站点上投放数字广告。根据 Trendkite 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Trendkite 收集的与您相关的数据相整合。我们利用发送给 Trendkite 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Trendkite 隐私政策
      Hotjar
      我们通过 Hotjar 在 Hotjar 提供支持的站点上投放数字广告。根据 Hotjar 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Hotjar 收集的与您相关的数据相整合。我们利用发送给 Hotjar 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Hotjar 隐私政策
      6 Sense
      我们通过 6 Sense 在 6 Sense 提供支持的站点上投放数字广告。根据 6 Sense 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 6 Sense 收集的与您相关的数据相整合。我们利用发送给 6 Sense 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. 6 Sense 隐私政策
      Terminus
      我们通过 Terminus 在 Terminus 提供支持的站点上投放数字广告。根据 Terminus 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 Terminus 收集的与您相关的数据相整合。我们利用发送给 Terminus 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. Terminus 隐私政策
      StackAdapt
      我们通过 StackAdapt 在 StackAdapt 提供支持的站点上投放数字广告。根据 StackAdapt 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 StackAdapt 收集的与您相关的数据相整合。我们利用发送给 StackAdapt 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. StackAdapt 隐私政策
      The Trade Desk
      我们通过 The Trade Desk 在 The Trade Desk 提供支持的站点上投放数字广告。根据 The Trade Desk 数据以及我们收集的与您在站点中的活动相关的数据,有针对性地提供广告。我们收集的数据可能包含您访问的页面、您启动的试用版、您播放的视频、您购买的东西、您的 IP 地址或设备 ID。可能会将此信息与 The Trade Desk 收集的与您相关的数据相整合。我们利用发送给 The Trade Desk 的数据为您提供更具个性化的数字广告体验并向您展现相关性更强的广告。. The Trade Desk 隐私政策
      RollWorks
      We use RollWorks to deploy digital advertising on sites supported by RollWorks. Ads are based on both RollWorks data and behavioral data that we collect while you’re on our sites. The data we collect may include pages you’ve visited, trials you’ve initiated, videos you’ve played, purchases you’ve made, and your IP address or device ID. This information may be combined with data that RollWorks has collected from you. We use the data that we provide to RollWorks to better customize your digital advertising experience and present you with more relevant ads. RollWorks Privacy Policy

      是否确定要简化联机体验?

      我们希望您能够从我们这里获得良好体验。对于上一屏幕中的类别,如果选择“是”,我们将收集并使用您的数据以自定义您的体验并为您构建更好的应用程序。您可以访问我们的“隐私声明”,根据需要更改您的设置。

      个性化您的体验,选择由您来做。

      我们重视隐私权。我们收集的数据可以帮助我们了解您对我们产品的使用情况、您可能感兴趣的信息以及我们可以在哪些方面做出改善以使您与 Autodesk 的沟通更为顺畅。

      我们是否可以收集并使用您的数据,从而为您打造个性化的体验?

      通过管理您在此站点的隐私设置来了解个性化体验的好处,或访问我们的隐私声明详细了解您的可用选项。