Building systems designs are typically performed using traditional methods, often using 'rule-of-thumb' approaches that are subject to additional margins or safety factors to make allowances for errors. With BIM and Schneider's Advanced Electrical Design for Autodesk Revit solution, electrical systems can now be more accurately and confidently designed.
MEP
Autodesk University Las Vegas is quickly approaching, and so is the Fabrication Experience at Connect & Construct, coming up on November 18, 2019. We’ve been busy preparing an exciting, valuable and unique Fabrication event for MEP and structural engineers, designers, detailers, and fabricators. This event is one you don’t want to miss! Here are the top…
Events
By incorporating sustainability into the design process, project teams can inform better decisions and improve energy efficiency throughout the life of a building. The Intergovernmental Panel on Climate Change warns that drastic changes are needed to limit the increase in global temperatures to 1.5 degrees Celsius by 2050. Over that same timeframe, the global population…
Architecture
Autodesk University Las Vegas is around the corner, kicking off on November 12th, 2018 and running through November 15th. We’ve been busy creating a unique and valuable experience for MEP engineers, designers, detailers, and fabricators. We think that this year’s AU is one to not miss, and we’re confident that if you skip out, you’ll…
MEP