Start your final test

Ready to test your knowledge? Pass this required test with a score of 75% or more to complete the course and earn a certificate of completion.  

You'll earn a certificate of completion each time you pass a skill-builder course. Find your recognitions on My Dashboard.

Introduction to CAD, CAM and Practical CNC Machining Test

Required for course completion

30 questions

When editing tool parameters, what does the ‘fx’ indicate for a specific field?

(Select one)
Select an answer

How can the attributes of a title block be modified?

(Select one)
Select an answer

Which of the following is an important difference when comparing Bodies and Components?

(Select one)
Select an answer

When defining sketch point locations spaced across a part to be used with the Hole tool, which of the following constraint types will ensure that all the points are at the same height as a fully dimensioned point?

(Select one)
Select an answer

When measuring and adjusting the squareness of a vise, which is the preferred part of the vise to test for squareness?

(Select one)
Select an answer

Under the Setup tab, which stock mode allows the user to input specific width, depth, and height measurements to define the stock size?

(Select one)
Select an answer

What is fixturing also often referred to as?

(Select one)
Select an answer

A major advantage of the 2D Adaptive Clearing toolpath is that it:

(Select one)
Select an answer

Which dimension type creates multiple dimensions from the same starting point?

(Select one)
Select an answer

Direct modeling techniques such as using Press Pull and Delete are useful for making modifications to designs:

(Select one)
Select an answer

What is the typical attachment hardware used to hold down a vise or stock to a CNC mill’s table?

(Select one)
Select an answer

Which of the following capabilities in the CAM Tool Library allow a user to redefine the tool’s numerical order in a Cloud Library?

(Select one)
Select an answer

When using the Fillet tool in the Solid toolset, what does the default numerical value represent?

(Select one)
Select an answer

Which of the following is the parent view type for other views in a drawing?

(Select one)
Select an answer

Which of the following tool types in a CNC mill can be used to create threads in an existing hole?

(Select one)
Select an answer

What color is used to characterize fully defined sketch entities?

(Select one)
Select an answer

In an active sketch, where can Construction Geometry be enabled or disabled?

(Select one)
Select an answer

Methods for holding material down in a machine are referred to as:

(Select one)
Select an answer

Which of the following steps should precede a chip-breaking Drill operation for holes on a part?

(Select one)
Select an answer

How can a sketch constraint that was automatically applied be removed after it has been placed?

(Select one)
Select an answer

Securely fixturing the material is especially important in CNC machining due to:

(Select one)
Select an answer

When selecting stock size, it is important to choose a size that is:

(Select one)
Select an answer

When selecting geometry to define a 2D Contour toolpath, clicking the red arrow after selecting the contour will:

(Select one)
Select an answer

Which statement best describes the dynamics of a typical 3-axis CNC mill?

(Select one)
Select an answer

Which of the following elements may be found in the title block of a blueprint?

(Select one)
Select an answer

In a CNC mill, what axis typically aligns parallel with the fixed jaw on a vise?

(Select one)
Select an answer

Which tool in the Drawing workspace can be used to add text with an attached marker that points to a desired feature?

(Select one)
Select an answer

When working with a CNC machine, which of the following safety precautions must be taken before operating the machine?

(Select one)
Select an answer

Which tool in the Design workspace can be used to slice a body or component to view internal geometry?

(Select one)
Select an answer

Which GD&T symbol should be used to signify that a surface or feature is orthogonal to a specified datum plane?

(Select one)
Select an answer

30/30 questions left unanswered

Was this information helpful?