Learning

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Support & Policies

Learning

Module quiz

5 questions

When creating a new CAM setup for a second operation, which stock option allows for continued rest machining from a previous setup?

(Select one)

From preceding setup.
Relative size box.
From solid.
Fixed size box.

Select an answer

When creating a Scallop toolpath which geometry option will ensure the tool cuts up to sharp corners at the edge of a selection?

(Select one)

Contact Point Boundary.
Rest Machining.
Slope
Tool Orientation.

Select an answer

How is the direction of cut changed from Along u to Along v for a Flow toolpath?

(Select one)

Changing the Isometric Direction.
Allowing for Both ways cutting.
Increasing the Tangential Fragment Distance.
Changing the Cutting Mode.

Select an answer

What do the red double arrows indicate for a 3D Flow Toolpath?

(Select one)

The direction of cut.
The tool orientation with the spindle.
The toolpath boundary.
The side of cut.

Select an answer

In a Scallop toolpath what is the difference between Direction of cut and Up/Down Milling?

(Select one)

Direction of cut determines which axis is being followed while Up/Down Milling determines the angle deviation from the axis.
Direction of cut determines the tool rotation direction while Up/Down Milling determines lead in/lead out.
Direction of cut determines Climb vs Conventional cut while Up/Down Milling determines the lead in/lead out.
Direction determines Climb vs Conventional while Up/Down Milling is based on geometry slope.

Select an answer

5/5 questions left unanswered