Practice exercise

00:01

This is a practice exercise video solution

00:06

for this practice will begin with the supply dataset trade dot f three D.

00:10

We want to navigate to the manufacturer workspace and

00:13

ensure that the units are set to inch.

00:16

Then we want to create a new camp set up

00:24

from here. We want to make sure that the stock is based off from solid option

00:29

and the stock from solid is going to be the body called stock.

00:33

Then in the setup we want to make sure that the model is going to be the part body.

00:39

Next we want to make sure that the coordinate system or WCS

00:42

orientation and position is correct by selecting the Z axis and plane

00:46

Z is going to be along the default Y axis with X pointing down into the right.

00:52

Then for the origin we're going to use a box point on the corner of our stock

00:57

on the post process to make sure that we have a program name number

01:01

and in this case we're going to call this tray for a program comet.

01:05

We're going to leave the WCS offset set to zero and say, okay,

01:10

once you're done, make sure that you do save the data set before moving on