Start your final test

Ready to test your knowledge? Pass this required test with a score of 75% or more to complete the course and earn a certificate of completion.  

You'll earn a certificate of completion each time you pass a skill-builder course. Find your recognitions on My Dashboard.

Final test

Required for course completion

30 questions

When creating a new milling setup in a design that already contains a setup, how is the stock definition configured for the new setup by default?

(Select one)
Select an answer

If the first operation in a milling Setup containing several operations is modified, what must be done to the subsequent operations with a red-exclamation icon before simulating the entire setup?

(Select one)
Select an answer

When reviewing a design file on the Fusion 360 web interface, what tab would contain a link to any Setup Sheets created for the file?

(Select one)
Select an answer

How can the external threads of an imported file with no design history be removed?

(Select one)
Select an answer

Which Turning Face option in the Passes tab controls the amount of material an initial pass leaves for subsequent finishing passes?

(Select one)
Select an answer

What color does the tool and holder change to when a collision is detected in the Simulate tool?

(Select one)
Select an answer

How can physical materials be applied to a part.

(Select one)
Select an answer

What classification is given to a design that has an external reference (i.e. a fixture assembly inserted into a model design)?

(Select one)
Select an answer

Which of the following workflows should be used to most efficiently create a tapped hole at a given sketch point?

(Select one)
Select an answer

When creating an NC program, what needs to be done to distinguish multiple setups post processed at the same time?

(Select one)
Select an answer

What tool is active as soon as you drag and drop a design from the Data Panel into the design window?

(Select one)
Select an answer

Which of the following is a valid parameter name?

(Select one)
Select an answer

When defining a User Parameter, what effect does the Comment field have?

(Select one)
Select an answer

When configuring a Turning Single Groove toolpath, how can it be designated for an internal grooving operation?

(Select one)
Select an answer

When using the Simulate tool, which part of a CNC machine is animated in the visualization?

(Select one)
Select an answer

How can a group of 2 or more components in a design be fixed relative to one another?

(Select one)
Select an answer

Which plane in the Heights tab of a 2D Contour operation controls how deep the tool will cut?

(Select one)
Select an answer

How can finishing passes be enabled for a Turning Face operation?

(Select one)
Select an answer

Which of the following can be included in a Setup Sheet?

(Select one)
Select an answer

If a collaborator leaves a note on a design in the Fusion 360 web interface, how can the user view the note inside the software?

(Select one)
Select an answer

Which of the following options in the Passes tab of a 2D Adaptive Clearing toolpath is used to control how much of the tool is engaged during the operation?

(Select one)
Select an answer

Which of the following parameters would best represent a circle offset value that is halfway between parameters ID and OD, where ID = 10 and OD = 20?

(Select one)
Select an answer

In the Manufacture workspace, how can a new cloud tool library be added?

(Select one)
Select an answer

When working in an imported design, how can the dimensions of specific geometry be identified?

(Select one)
Select an answer

Which of the following inputs are required for the Revolve tool?

(Select one)
Select an answer

Which of the following tools in the Design workspace can be used to make modeled external threads on a cylindrical face?

(Select one)
Select an answer

What color do Fusion 360 sketch entities turn when they are fully defined by dimensions and constraints?

(Select one)
Select an answer

Which of the following outlines is applied to a GD&T Feature Control Frame?

(Select one)
Select an answer

Which 2D Contour Passes tab option allows a toolpath to follow the selected contour while entering the stock at a constant angle?

(Select one)
Select an answer

What Cycle Type in a Drill toolpath causes the tool to fully retract in a pecking operation, allowing chips to break and for coolant to enter the hole?

(Select one)
Select an answer

30/30 questions left unanswered

Was this information helpful?