Practice exercise

In this exercise, you'll practice how to Post Process a CAM file.

Download dataset

Exercise

It appears you don't have a PDF plugin for this browser.

00:01

This is a practice exercise video solution.

00:06

For this practice, we're going to start with the supply design post process.

00:10

We're going to select our toolpath inside of setup

00:17

We need to search for a specific type of machine so we'll begin filtering by milling.

00:22

We'll take a look at the vendors and we'll search for Hass automation and then we'll take a look for a specific Hass post processor.

00:30

For this case we're going to use the Hass pre NGC or the older pre next gen controller.

00:37

We're going to make sure that we select post.

00:40

Save location and in this case 1001 is going to be overwritten in my temp document,

00:45

and then we can review the code to make sure all of the toolpath motions, the tools and notes are included.

00:51

Once we review the code, let's go ahead and close this and make sure that we save any changes.

Video transcript

00:01

This is a practice exercise video solution.

00:06

For this practice, we're going to start with the supply design post process.

00:10

We're going to select our toolpath inside of setup

00:17

We need to search for a specific type of machine so we'll begin filtering by milling.

00:22

We'll take a look at the vendors and we'll search for Hass automation and then we'll take a look for a specific Hass post processor.

00:30

For this case we're going to use the Hass pre NGC or the older pre next gen controller.

00:37

We're going to make sure that we select post.

00:40

Save location and in this case 1001 is going to be overwritten in my temp document,

00:45

and then we can review the code to make sure all of the toolpath motions, the tools and notes are included.

00:51

Once we review the code, let's go ahead and close this and make sure that we save any changes.

Was this information helpful?