Module quiz

There is no functionality to check operations sorted by tool.

This information is only available in the Setup Sheet for an NC Program.

Renumber the tool so that they match the sequence of operations in the active setup.

Select the black arrow next to the tool in the tool list.

Step by step directions for preparing stock prior to machining.

A user manual for the specific machine a part will be run on.

Information about the coordinate system, tools, and program to machine a specific part.

Detailed inspection numbers to validate a part after machining.

2D Chamfer.

2D Pocket.

2D Contour.

2D Adaptive Clearing.

The stock is created to completely enclose both solids together.

The stock exactly matches the selected solids.

The stock is created to completely enclose each solid individually.

The stock is created rounded up to the next common size.

Right-click > Edit.

Right-click > Create Derived Operation.

Right-click > Compare and Edit.

This functionality does not exist in the Manufacture workspace.