& Construction

Integrated BIM tools, including Revit, AutoCAD, and Civil 3D
& Manufacturing

Professional CAD/CAM tools built on Inventor and AutoCAD
Integrated BIM tools, including Revit, AutoCAD, and Civil 3D
Professional CAD/CAM tools built on Inventor and AutoCAD
Transcript
00:03
There are devices in InfoSurge that will help to reduce the magnitude of the pressure waves when a transient occurs in the system.
00:12
These devices are created by first creating a node and then changing it into a surge protection device (SPD).
00:21
Valves are one type of SPD in InfoSurge.
00:25
There are a few main types of valves, and each one has its own distinct impacts on surge results.
00:33
These include: Gate valves: Often used for smaller isolation valves
00:39
Globe valves: A common control valve type
00:43
Butterfly valves: Often used for larger isolation valves
00:48
Factors like inflow and outflow diameter, opening and closing time, inflow and outflow resistance,
00:57
and external pressure must be assigned the correct values for a valve to work properly.
01:03
You must also understand the meaning of model output fields such as inlet and outlet pressure,
01:10
as well as external flows and volumes.
01:13
For more information on input and output data, visit the InfoSurge help pages on the Autodesk website.
01:21
InfoSurge supports many other valves, such as:
01:26
Pressure relief valves (PRV): Begin to open when the pressure at the sensing node exceeds the opening pressure.
01:34
Excessive high-pressure surges are prevented by ejecting water out of a side orifice.
01:40
Surge anticipation valves (SAV): Activate on a downsurge when the pressure at the sensing node drops below the opening pressure.
01:50
These are ideal for solving the problem of upsurge at pumps due to reverse flow
01:56
or wave reflection in systems where water-column separation will not occur.
02:02
Single and two-stage air vacuum valves (AVV):
02:07
Take air in when the pipeline pressure drops below atmospheric pressure and releases air when exceeding it.
02:14
A Single Stage AVV will usually have the same orifice for inflow and outflow.
02:21
A Two-Stage AVV will have a different orifice for inflow and outflow,
02:26
with the outflow orifice being smaller to reduce air slam when all air is expelled, and the liquid columns rejoin.
02:35
Three-stage air vacuum valves:
02:38
Allow air in through one orifice and has two outlet orifices that allow air out.
02:45
The first outlet orifice is large to quickly allow air to be expelled,
02:50
and the second outflow orifice is smaller to reduce air slam by releasing air slower.
02:57
Hydraulically actuated anticipation valves (Hyd-SAV):
03:02
Models both low pressure pilot (LPP) during downsurge and high-pressure pilot (HPP) during upsurge.
03:11
This surge anticipation valve is controlled by pressure rather than time.
03:16
Electrically actuated anticipation valves (Elec-SAV):
03:22
Start opening on a pump trip condition, stay open for a specified time, and then close.
03:28
This combination of regular SAV and Hyd-SAV requires entering a delay time as an additional data item.
03:38
If you know what a specific valve does, you can find a model SPD to match that behavior.
03:45
Note that in a surge analysis, SPDs are placed on a junction.
03:50
It is critical that a junction with an SPD has only one pipe connected to each side.
03:57
Otherwise, InfoSurge displays an error message that reads “Invalid pipe connection at surge protection device”.
Video transcript
00:03
There are devices in InfoSurge that will help to reduce the magnitude of the pressure waves when a transient occurs in the system.
00:12
These devices are created by first creating a node and then changing it into a surge protection device (SPD).
00:21
Valves are one type of SPD in InfoSurge.
00:25
There are a few main types of valves, and each one has its own distinct impacts on surge results.
00:33
These include: Gate valves: Often used for smaller isolation valves
00:39
Globe valves: A common control valve type
00:43
Butterfly valves: Often used for larger isolation valves
00:48
Factors like inflow and outflow diameter, opening and closing time, inflow and outflow resistance,
00:57
and external pressure must be assigned the correct values for a valve to work properly.
01:03
You must also understand the meaning of model output fields such as inlet and outlet pressure,
01:10
as well as external flows and volumes.
01:13
For more information on input and output data, visit the InfoSurge help pages on the Autodesk website.
01:21
InfoSurge supports many other valves, such as:
01:26
Pressure relief valves (PRV): Begin to open when the pressure at the sensing node exceeds the opening pressure.
01:34
Excessive high-pressure surges are prevented by ejecting water out of a side orifice.
01:40
Surge anticipation valves (SAV): Activate on a downsurge when the pressure at the sensing node drops below the opening pressure.
01:50
These are ideal for solving the problem of upsurge at pumps due to reverse flow
01:56
or wave reflection in systems where water-column separation will not occur.
02:02
Single and two-stage air vacuum valves (AVV):
02:07
Take air in when the pipeline pressure drops below atmospheric pressure and releases air when exceeding it.
02:14
A Single Stage AVV will usually have the same orifice for inflow and outflow.
02:21
A Two-Stage AVV will have a different orifice for inflow and outflow,
02:26
with the outflow orifice being smaller to reduce air slam when all air is expelled, and the liquid columns rejoin.
02:35
Three-stage air vacuum valves:
02:38
Allow air in through one orifice and has two outlet orifices that allow air out.
02:45
The first outlet orifice is large to quickly allow air to be expelled,
02:50
and the second outflow orifice is smaller to reduce air slam by releasing air slower.
02:57
Hydraulically actuated anticipation valves (Hyd-SAV):
03:02
Models both low pressure pilot (LPP) during downsurge and high-pressure pilot (HPP) during upsurge.
03:11
This surge anticipation valve is controlled by pressure rather than time.
03:16
Electrically actuated anticipation valves (Elec-SAV):
03:22
Start opening on a pump trip condition, stay open for a specified time, and then close.
03:28
This combination of regular SAV and Hyd-SAV requires entering a delay time as an additional data item.
03:38
If you know what a specific valve does, you can find a model SPD to match that behavior.
03:45
Note that in a surge analysis, SPDs are placed on a junction.
03:50
It is critical that a junction with an SPD has only one pipe connected to each side.
03:57
Otherwise, InfoSurge displays an error message that reads “Invalid pipe connection at surge protection device”.
There are devices in InfoSurge that help to reduce the magnitude of pressure waves when a transient occurs in the system.
These devices are created by first creating a node and then changing it into a surge protection device (SPD).
Valves are one type of SPD in InfoSurge.
There are a few main types of valves, each with distinct impacts on surge results:
For a valve to work properly, correct values must be assigned for factors such as:
Also important to understand meaning of model output fields, such as inlet and outlet pressure, and external flows and volumes.
For more information on input and output data, visit the InfoSurge help pages on the Autodesk website.
InfoSurge supports many other valves, such as:
Pressure relief valves (PRV):
Begin to open when pressure at sensing node exceeds opening pressure. Excessive high-pressure surges are prevented by ejecting water out of a side orifice.
Surge anticipation valves (SAV):
Activate on a downsurge when pressure at sensing node drops below opening pressure. Ideal for solving problem of upsurge at pumps due to reverse flow or wave reflection in systems where water-column separation will not occur.
Single and two-stage air vacuum valves (AVV):
Take air in when pipeline pressure drops below atmospheric pressure and releases air when exceeding it.
Single stage AVV usually has same orifice for inflow and outflow.
Two-stage AVV has different orifice for inflow and outflow, with smaller outflow orifice to reduce air slam when all air is expelled and liquid columns rejoin.
Three-stage air vacuum valves:
Have one orifice to allow air in and two outlet orifices—first is large to allow air to be expelled quickly, second is smaller to reduce air slam by releasing air more slowly.
Hydraulically actuated anticipation valves (Hyd-SAV):
Models both low pressure pilot (LPP) during downsurge and high-pressure pilot (HPP) during upsurge.
Surge anticipation valve that is controlled by pressure rather than time.
Electrically actuated anticipation valves (Elec-SAV):
Start opening on pump trip condition, stay open for specified time, and then close.
Combination of regular SAV and Hyd-SAV that requires entering a delay time as additional data item.
If the function of a specific valve is understood, a model SPD can be found to match that behavior.
Note that in a surge analysis, SPDs are placed on a junction.
IMPORTANT: A junction with an SPD must have only one pipe connected to each side, or InfoSurge displays the error message: “Invalid pipe connection at surge protection device”.
How to buy
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use | Legal | © 2025 Autodesk Inc. All rights reserved
Sign in to start learning
Sign in for unlimited free access to all learning content.Save your progress
Take assessments
Receive personalized recommendations
May we collect and use your data?
Learn more about the Third Party Services we use and our Privacy Statement.May we collect and use your data to tailor your experience?
Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.