Creating a rebar length schedule

00:02

OK, getting down to it.

00:03

Now that we have our peers and foundation squared away, and we have rebar in at least one or two peers, we can start creating schedules.

00:10

I know we don't have everything fully reinforced. That's fine.

00:13

Why wait until your finish, though?

00:15

Once we have the schedules in place, we can add, remove, or reconfigure rebar and our schedules will adjust accordingly.

00:22

Okay, so let's jump into our model we've been working on.

00:25

Let me go to my stealth elevation, only because I want to.

00:30

Now go to your view tab, go to schedules.

00:34

Let's go to schedules quantities.

00:38

Now I want to scroll down to until find structural rebar.

00:42

For the name, let's call it Rebar length schedule.

00:49

Let's click "OK".

00:52

Let's add the following components.

00:54

So, let's see here.

00:55

I want to scroll down to find a rebar number.

01:01

Rebar number, add that.

01:04

Grab the shape, add that.

01:09

Let me scroll up the bar diameter.

01:11

We're going to grab that.

01:13

Bar lank, that's a good one.

01:15

Grab that.

01:17

Let's find our material.

01:22

Add that.

01:25

Quantity is always good.

01:28

Grab that.

01:30

Reinforcement volume is good.

01:36

You have total bar length, this is anything.

01:38

So, we'll grab total bar length.

01:42

We're going to throw in our bend diameter, too, for good measure.

01:46

Add that.

01:50

Let's go to our sorting and grouping tab.

01:52

I want to start by rebar number.

01:58

Let's click on grand totals.

02:01

This time, I want to uncheck "Itemize every instance".

02:08

Let's jump to the formatting tab for bar length.

02:13

I want to calculate totals.

02:20

Let's grab total bar length, calculate totals here.

02:27

Click "OK".

02:31

And again, there you have it.

02:33

These are bar numbers, our shapes, the diameters, the bar length, total bar length for each of these,

02:40

because it's several of each kind.

02:41

So, let's going to add it up here. So, here's our total bar length.

02:44

There you go. That's how you create a rebar length schedule.