Fillet walls

Step-by-step guide

Apply a fillet to two adjacent wall segments, and set a fillet radius during and prior to construction.

  1. Open the project W-Arch_Fillet_Walls-RVT2021.rvt. It opens in the Level 1 plan view.
  2. Zoom in on the lower-right corner of the building and select the wall.
  3. In the Modify | Walls contextual tab > Create panel, click Create Similar.

In the Revit interface, a wall selected in the plan view, and in the Modify | Walls contextual tab, on the Create panel, Create Similar selected.

  1. From the Draw panel, click Fillet Arc.

In the Modify | Walls contextual tab, on the Draw panel, Fillet Arc selected.

  1. Select the vertical wall.
  2. Select the horizontal wall.
  3. Move the cursor to see the potential arcs.

With a vertical and horizontal wall selected, the moving cursor highlighted in red, and a potential arc displayed.

  1. Click to place the arc.
  2. Click the temporary dimension for the radius and type 6'-0".

For the placed arc, a temporary dimension of 6 feet being entered for the radius.

To set the radius before construction:

  1. In the Options Bar, select Radius and type 2'-0".
  2. Select a different vertical wall and then a horizontal wall to apply the fillet.

In the Options Bar, the Radius option selected and set to 2 feet, highlighted in red, and in the plan view, the fillet applied to the selected walls, highlighted in red.

  1. Click Modify.
  2. Right-click in the view and select Zoom to Fit.
  3. Save the project.