• Civil 3D
  • ReCap

Create a point cloud from scan data in ReCap Pro

Import, process, and index scan data to create a point cloud in ReCap Pro.


Tutorial resources

These downloadable resources will be used to complete this tutorial:


00:03

In Autodesk ReCap Pro, you can create a point cloud from scan or drone data that is ready to be imported into other Autodesk applications,

00:12

such as AutoCAD, Civil 3D, Revit, or Inventor.

00:16

From the ReCap Pro Home screen, click new project.

00:20

In the new project popup, select import point cloud to import the scan data.

00:26

In the create new project popup, add a name, and specify the save location.

00:33

Click proceed.

00:35

Click select files to import to see a list of supported file formats.

00:40

Navigate to your scan folder and select all the scan files in the folder, or simply drag and drop to the target shown on the screen.

00:48

Note that if a coordinate system is needed or a transformation required, this can be specified in the advanced tab.

00:56

Click import files in the bottom right.

00:59

The files start importing.

01:01

Once all the files have been imported and registered successfully, they are ready to be indexed.

01:07

Click index scans in the bottom right of the screen to proceed.

01:11

Once the indexing is complete, click launch project.

01:15

The point cloud creation is now complete, and the .rcp file can be imported into other cloud-supporting Autodesk applications.

Video transcript

00:03

In Autodesk ReCap Pro, you can create a point cloud from scan or drone data that is ready to be imported into other Autodesk applications,

00:12

such as AutoCAD, Civil 3D, Revit, or Inventor.

00:16

From the ReCap Pro Home screen, click new project.

00:20

In the new project popup, select import point cloud to import the scan data.

00:26

In the create new project popup, add a name, and specify the save location.

00:33

Click proceed.

00:35

Click select files to import to see a list of supported file formats.

00:40

Navigate to your scan folder and select all the scan files in the folder, or simply drag and drop to the target shown on the screen.

00:48

Note that if a coordinate system is needed or a transformation required, this can be specified in the advanced tab.

00:56

Click import files in the bottom right.

00:59

The files start importing.

01:01

Once all the files have been imported and registered successfully, they are ready to be indexed.

01:07

Click index scans in the bottom right of the screen to proceed.

01:11

Once the indexing is complete, click launch project.

01:15

The point cloud creation is now complete, and the .rcp file can be imported into other cloud-supporting Autodesk applications.

Was this information helpful?