Compare two scenarios to determine the differences between them.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
Transcript
00:04
Once you have run a batch simulation of scenarios that you have set up,
00:07
you can use the scenario comparison tool to perform
00:10
a comparison between two scenarios to determine the differences
00:15
to begin.
00:16
Double click the desired project dot APR X file to open Argi
00:20
Pro.
00:22
Once the project startss,
00:23
click the info water pro tab to open the info Water Pro ribbon
00:28
in the project panel, click initialize
00:32
in the model explorer on the command center tab expand the scenario folder,
00:38
then double click compare data scenario
00:42
in the compared data scenarios.
00:43
Dialogue in the save as selection set group,
00:46
ensure that the save elements that have different values option is selected
00:50
then click browse
00:53
in the selection set window that opens click new,
00:58
enter a new idea of varies and then click OK,
01:02
click OK. Again to close the selection set window
01:06
back in the compared data scenarios, dialogue set scenario number one to existing
01:12
and scenario number 2 to 2030 max day.
01:17
These are the two scenarios that you will be comparing
01:21
in the report colors group set the color for scenario number one to yellow
01:25
and the color for scenario number two to cyan
01:30
the color for a different value can remain as red.
01:33
Click compare
01:36
the data scenario comparison report appears with a color coded
01:39
comparison between the existing and the 2030 max day scenarios.
01:44
Click the different tabs to see the comparison results for the various components
01:49
as well as the general summary tab.
01:51
On the summary tab.
01:53
The facility row shows that the existing
01:55
scenario selects facilities from the active network.
01:58
While the 2030 max day scenario selects facilities based on the query set F ac 2030.
02:05
The summary tab also shows that all data sets are the
02:07
same between the two scenarios except for the demand set,
02:12
switch to the junction tab and note the similarities and differences.
02:16
This tab details the specific demands and patterns used for the
02:20
scenarios but be aware that it only lists the differences.
02:24
So you are seeing only the junction I DS and
02:26
values that have different values between the two scenarios.
02:30
The junctions that do not have any changes are not listed,
02:34
switch to the pipes set tab and note the similarities and differences.
02:40
This tab details the pipe information used for each of the two scenarios.
02:45
And again, as was the case for the junctions,
02:48
it only shows the pipes that have differences.
02:51
Click close to close the data scenario comparison report,
02:55
save your project.
00:04
Once you have run a batch simulation of scenarios that you have set up,
00:07
you can use the scenario comparison tool to perform
00:10
a comparison between two scenarios to determine the differences
00:15
to begin.
00:16
Double click the desired project dot APR X file to open Argi
00:20
Pro.
00:22
Once the project startss,
00:23
click the info water pro tab to open the info Water Pro ribbon
00:28
in the project panel, click initialize
00:32
in the model explorer on the command center tab expand the scenario folder,
00:38
then double click compare data scenario
00:42
in the compared data scenarios.
00:43
Dialogue in the save as selection set group,
00:46
ensure that the save elements that have different values option is selected
00:50
then click browse
00:53
in the selection set window that opens click new,
00:58
enter a new idea of varies and then click OK,
01:02
click OK. Again to close the selection set window
01:06
back in the compared data scenarios, dialogue set scenario number one to existing
01:12
and scenario number 2 to 2030 max day.
01:17
These are the two scenarios that you will be comparing
01:21
in the report colors group set the color for scenario number one to yellow
01:25
and the color for scenario number two to cyan
01:30
the color for a different value can remain as red.
01:33
Click compare
01:36
the data scenario comparison report appears with a color coded
01:39
comparison between the existing and the 2030 max day scenarios.
01:44
Click the different tabs to see the comparison results for the various components
01:49
as well as the general summary tab.
01:51
On the summary tab.
01:53
The facility row shows that the existing
01:55
scenario selects facilities from the active network.
01:58
While the 2030 max day scenario selects facilities based on the query set F ac 2030.
02:05
The summary tab also shows that all data sets are the
02:07
same between the two scenarios except for the demand set,
02:12
switch to the junction tab and note the similarities and differences.
02:16
This tab details the specific demands and patterns used for the
02:20
scenarios but be aware that it only lists the differences.
02:24
So you are seeing only the junction I DS and
02:26
values that have different values between the two scenarios.
02:30
The junctions that do not have any changes are not listed,
02:34
switch to the pipes set tab and note the similarities and differences.
02:40
This tab details the pipe information used for each of the two scenarios.
02:45
And again, as was the case for the junctions,
02:48
it only shows the pipes that have differences.
02:51
Click close to close the data scenario comparison report,
02:55
save your project.
Once you have run a batch simulation of scenarios that you have set up, you can use the Scenario Comparison tool to perform a comparison between two scenarios to determine the differences.
These are the two scenarios that you will be comparing.
The Data Scenario Comparison Report appears, with a color-coded comparison between the EXISTING and the 2030_MAXDAY scenarios.
On the Summary tab, the Facility row shows that the EXISTING scenario selects facilities based on the Query Set FAC_EXISTING, while the 2030_MAXDAY scenario selects facilities based on the Query Set FAC_2030.
The Summary tab also shows that all data sets are the same between the two scenarios, except for the Demand Set.
The Junction Set tab details the specific demands and patterns used for the scenarios, but it only lists the differences. Therefore, it reports only the junction IDs and values that have different values between the two scenarios. The junctions that do not have any changes are not listed.
The Pipe Set tab details the pipe information used for each of the two scenarios. Again, it only shows the pipes that have differences.
