After you calculate reinforcements for slabs and walls, calculate and analyze reinforcements for columns.
Transcript
00:03
Reinforced concrete structures
00:06
must be designed according to local codes,
00:09
there are many code specific parameters already loaded into ARS
00:14
A.
00:15
You can calculate the required reinforcement
00:18
in a reinforced concrete structure according to the applicable code
00:23
to calculate and analyze reinforcements for columns.
00:27
You must define the code parameters. First
00:31
before beginning with this procedure,
00:33
ensure you have already calculated reinforcements for slabs and panels
00:38
from the text menu, select design
00:42
required reinforcement of RC beams, columns, options
00:46
code parameters
00:49
in the RC member type dialogue,
00:51
select the new icon to create a new member type definition
00:57
in the member type definition, dialogue,
00:59
open the column tab,
01:01
edit the column name
01:03
and then in the buckling with respect to Y axis group,
01:08
click the buckling length coefficient icon
01:12
from the buckling scheme's dialogue,
01:14
select the 0.5 icon and then click, OK.
01:19
Then in the buckling with respect to Z
01:22
axis group,
01:23
select the building length coefficient icon
01:27
again,
01:28
select the 0.5 icon and click. OK.
01:32
Please note
01:33
both of these buckling length coefficients
01:36
should be set to non sway structure
01:40
when finished, click save.
01:43
Now with the new column type selected in the RC member dialogue,
01:47
click within the lines, members field,
01:51
then in the object inspector window,
01:53
right? Click columns
01:56
and click, select all
01:58
click again within the lines members field
02:02
to update the field with a column numbers,
02:05
click apply
02:07
to verify the columns have been assigned to the correct type.
02:11
You can view the member types with color codes.
02:15
First from the views, toolbar,
02:18
select section shapes,
02:20
then from the text menu,
02:22
select view display
02:25
from the display dialogue, select members
02:28
and then
02:29
select member types legends by colors,
02:34
click apply
02:35
and then click OK. To close the dialogue,
02:39
you can also verify the type definition
02:42
by viewing a table
02:44
again from the text menu.
02:46
Select view
02:48
tables
02:50
from the table's dialogue,
02:51
select members and then click OK.
02:54
A table displays where column type assignments display
02:59
close the table
03:02
from the text menu,
03:03
select design
03:05
require reinforcement of RC beams, columns, options
03:10
calculation parameters
03:13
in the dialogue,
03:14
select standard
03:16
to inspect the calculation parameters
03:19
in the calculation parameter definition dialogue
03:22
in the general tab,
03:24
the concrete parameters are specified
03:27
steel is defined in both the longitudinal reinforcement tab
03:33
and
03:33
the transversal reinforcement tab.
03:36
After verifying the specifications,
03:39
close the dialogue
03:41
back in the calculations parameters. Dialogue
03:44
click in the lines, bars, field to activate it
03:48
and then
03:49
in the object inspector window,
03:51
right, click columns and click, select all
03:55
click once more in the lines bars, field to update the field with the column numbers.
04:01
Click apply and close the dialogue
04:05
next from the text menu
04:07
select design required reinforcement of RC beams columns, options,
04:12
calculations
04:16
the calculations, dialogue displays
04:19
in the code combinations group
04:21
select S
04:23
and SLS
04:25
click, calculate
04:27
the time it takes for the calculations to process
04:31
depends on the structure and code combinations
04:34
along with other factors.
04:36
When it is complete, the calculations report dialogue displays
04:41
to inspect the results further
04:43
from the text menu. Select design
04:47
required reinforcements of RC beams, columns, options,
04:51
table RC member reinforcement.
04:55
This displays a table
04:57
of each member with reinforcements
05:00
applying and calculating reinforcements for columns is a highly
05:04
customizable process that can be verified in multiple steps.
00:03
Reinforced concrete structures
00:06
must be designed according to local codes,
00:09
there are many code specific parameters already loaded into ARS
00:14
A.
00:15
You can calculate the required reinforcement
00:18
in a reinforced concrete structure according to the applicable code
00:23
to calculate and analyze reinforcements for columns.
00:27
You must define the code parameters. First
00:31
before beginning with this procedure,
00:33
ensure you have already calculated reinforcements for slabs and panels
00:38
from the text menu, select design
00:42
required reinforcement of RC beams, columns, options
00:46
code parameters
00:49
in the RC member type dialogue,
00:51
select the new icon to create a new member type definition
00:57
in the member type definition, dialogue,
00:59
open the column tab,
01:01
edit the column name
01:03
and then in the buckling with respect to Y axis group,
01:08
click the buckling length coefficient icon
01:12
from the buckling scheme's dialogue,
01:14
select the 0.5 icon and then click, OK.
01:19
Then in the buckling with respect to Z
01:22
axis group,
01:23
select the building length coefficient icon
01:27
again,
01:28
select the 0.5 icon and click. OK.
01:32
Please note
01:33
both of these buckling length coefficients
01:36
should be set to non sway structure
01:40
when finished, click save.
01:43
Now with the new column type selected in the RC member dialogue,
01:47
click within the lines, members field,
01:51
then in the object inspector window,
01:53
right? Click columns
01:56
and click, select all
01:58
click again within the lines members field
02:02
to update the field with a column numbers,
02:05
click apply
02:07
to verify the columns have been assigned to the correct type.
02:11
You can view the member types with color codes.
02:15
First from the views, toolbar,
02:18
select section shapes,
02:20
then from the text menu,
02:22
select view display
02:25
from the display dialogue, select members
02:28
and then
02:29
select member types legends by colors,
02:34
click apply
02:35
and then click OK. To close the dialogue,
02:39
you can also verify the type definition
02:42
by viewing a table
02:44
again from the text menu.
02:46
Select view
02:48
tables
02:50
from the table's dialogue,
02:51
select members and then click OK.
02:54
A table displays where column type assignments display
02:59
close the table
03:02
from the text menu,
03:03
select design
03:05
require reinforcement of RC beams, columns, options
03:10
calculation parameters
03:13
in the dialogue,
03:14
select standard
03:16
to inspect the calculation parameters
03:19
in the calculation parameter definition dialogue
03:22
in the general tab,
03:24
the concrete parameters are specified
03:27
steel is defined in both the longitudinal reinforcement tab
03:33
and
03:33
the transversal reinforcement tab.
03:36
After verifying the specifications,
03:39
close the dialogue
03:41
back in the calculations parameters. Dialogue
03:44
click in the lines, bars, field to activate it
03:48
and then
03:49
in the object inspector window,
03:51
right, click columns and click, select all
03:55
click once more in the lines bars, field to update the field with the column numbers.
04:01
Click apply and close the dialogue
04:05
next from the text menu
04:07
select design required reinforcement of RC beams columns, options,
04:12
calculations
04:16
the calculations, dialogue displays
04:19
in the code combinations group
04:21
select S
04:23
and SLS
04:25
click, calculate
04:27
the time it takes for the calculations to process
04:31
depends on the structure and code combinations
04:34
along with other factors.
04:36
When it is complete, the calculations report dialogue displays
04:41
to inspect the results further
04:43
from the text menu. Select design
04:47
required reinforcements of RC beams, columns, options,
04:51
table RC member reinforcement.
04:55
This displays a table
04:57
of each member with reinforcements
05:00
applying and calculating reinforcements for columns is a highly
05:04
customizable process that can be verified in multiple steps.
