Find the maximum and minimum pressures in a water distribution system

Step-by-step guide

When performing a surge analysis in InfoSurge Pro, the output data can be customized in several ways. This example finds the maximum and minimum pressures in a water distribution system.

1. Double-click the desired project .aprx file to open ArcGIS Pro.
2. Click the InfoWater Pro tab to open the InfoWater Pro ribbon.
3. In the Project panel, click Initialize.
4. From the Model Explorer, click Run Manager.
5. In the Run Manager dialog box, switch to the Surge tab.
6. Click Run to perform a surge analysis.

7. Once it completes, click OK to close the dialog box.
8. From the ribbon, View panel, click Report Manager.
9. In the Report Manager dialog box, click New.
10. In the Output Report/Graph dialog box, under Available Output Sources, make sure *Active*:Surge is selected.
11. From the Tabular Report tab, select Surge Node Range.
12. In the Data Scope group box, enable Complete Report/Graph.
13. Click Open.

A table of maximum and minimum pressures for each ID appears in the Report Manager dialog box.

14. To view the highest maximum value, right-click the Max. Value column header and select Sort Descending.
15. To view the highest lowest minimum value, right-click the Min. Value column and select Sort Ascending.