Back to Profile

Expert guidance across Northern Europe

Success Story

Symetri’s Autodesk Fusion 360 Training Consolidates Skills for Manufacturing R&D Support at University of Aberdeen’s Engineering Workshop

Symetri’s Autodesk Fusion 360 Training Consolidates Skills for Manufacturing R&D Support at University of Aberdeen’s Engineering Workshop

Customer challenge

Upskill the whole engineering team in Fusion 360.

Aberdeen University had issues with the software they were using to programme their 3-axis CNC machine. They asked the machine manufacturer HAAS what they could do to get around the problems they were having and they recommended Autodesk Fusion 360.

The team saw immediate improvements apart from two issues that arose. Within an experienced engineering team that is very proficient the missing link was that they were all using the software in a different way and it became clear they needed consistency. The other issue was that despite having moved to Fusion 360 the team were still using manual machining techniques.

"In a way, we were all in our comfort zone with manual milling, but we knew we could gain far higher degrees of accuracy and dependability if we used Fusion 360 for Milling," says Gavin McFarlane, Senior Mechanical Technician.

They did some research on who could provide the training and found Autodesk Solution Provider Symetri.

Challenges they faced included:

  • Reduce wastage resulting from the hand finished rendered necessary by using old version of post-processor software
  • Minimise client rejection rate and associated costs of resupplying replacement products
  • Improve quality
  • Accelerate lead times

Project goals

The goal was to gain proficiency in 3-axis milling and lathe programming and to make sure the whole team were working in the same way. This was achieved following the 3 days of training.

Solution

Autodesk Fusion 360 Milling - Using High-Speed Machining Techniques.

We were impressed with Symetri's approach to training and they had an entire catalogue of training courses aimed at every aspect of Fusion 360, Essentials, Milling, Turing, Multi-axis Machining and many more.

We booked 3 days of training for our seven team members with the Advanced Manufacturing team at Symetri. This was all done virtually.

Solutions:

  • Post-processor upgrade to enable automation of tapping cycle;
  • Align post-processor with machine kinematics;
  • Hardware addition go Floating Tap Collet to eliminate manual inaccuracies.


Business outcome

The goals were achieved - Proficiency-Consistency-Accuracy.

Since the training, there has been no confusion among the team about any aspect of the software and team works in a consistent way.

As a result of the training, the following benefits have been achieved:

  • Fully automated tapping in cycle ensuring a greater accuracy;
  • Significant reduction in rejected output at Client's QA inspections;
  • Improved quality;
  • Higher levels of client satisfaction, now leading to new business opportunities.

Conclusion

"We wanted to make sure our team were all using the software in a consistent fashion, particularly when it came to Milling. Symetri took us through a three day course and we came out with a high degree of confidence that we could take on any project that came our way without hesitation."

"Its a great feeling, because the departments in the university that depend on us for top notch support are always under time pressures. Now there's never any delay in moving from concept to design to programming to finished output. Symetri covered everything. Now we can too." -Gavin McFarlane, Senior Mechanical Technician, Engineering Workshop, School of Engineering.

Project summary

    Duration & delivery

  • 3
  • 2002-02-01

    Autodesk solutions

  • Fusion 360
  • Fusion 360 for Manufacturing
  • Post Processor

    Services provided

  • CAM Programming
  • Design for Manufacturing
  • Post Processor
  • Tooling
  • Training

    Customer industry

  • Design
  • Subtractive Manufacturing
More success stories

Working Together to Expand Innovation and Realise Future Vision

Marshall Survey Associates (MSA) are 3D scan and measurement consultants, where accuracy and creativity are critical for customer satisfaction. MSA services cover measured build surveys of light surveys, area reports, topographic surveys, utility surveys, monitoring and visualisation/3D modelling. The challenge for MSA was to equip their team with the best tools and resources to drive the best outcomes for all stakeholders.


Driving Digital Innovation at Swift – How VR and Immersive Real-Time Design Review Can Accelerate the Design Process

Swift Group is recognised for its innovative, industry-leading designs and is continually striving towards designing both desirable exteriors and functional interiors. They have the tools required to design the exterior and interior of their products, however, to design a space to be functional and aesthetically pleasing, the design team needed to be able to visualise their designs and layouts.


A Tailored Approach Enhancing Best Practice Standards and Skills Across a Large Workforce

Document control, revision control and change of management is the biggest challenge we have these days. The importance of having documentation that is the correct revision is critical to the business. If someone is working to the wrong or incorrect revision, it can be potentially catastrophic to the business. Hosokawa Micron wanted a solution that would overcome this problem.


By accessing and using Partner Finder, you acknowledge and agree to the following Additional Terms as referenced in the Website Terms of Use: (i) Partner Finder may be modified, updated, interrupted, limited, suspended, or discontinued at any time without notice or liability; (ii) any query or request for information regarding a specific provider or provider services may be forwarded to that provider, however Autodesk in its discretion may retain a record to conduct business analytics to improve Partner Finder and other Autodesk products and services; (iii) Autodesk has no obligation to enforce any terms on your behalf against another user; and (iv) any feedback you provide in connection with a provider, including ratings or reviews, is a non-confidential “Submission” as defined in the Website Terms of Use. You are advised to conduct your own independent analysis and assessment of any information provided by or though Partner Finder, including whether a selected provider is appropriate for your particular circumstances. Without limiting the Website Terms of Use, Autodesk does not warrant, endorse, guarantee, or assume responsibility for any service advertised or offered by a provider through Partner Finder or any hyperlinked website or service. Autodesk is not liable for the content of this site, or for the consequences of any actions you may take based on information provided by, or through, this site. You release Autodesk and its affiliates and subsidiaries from all liability arising from your use of Partner Finder, including any hyperlinked website, service, or content.

This page has been translated for your convenience using a machine translation service. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. As a result, this translation may contain errors and inaccuracies. Autodesk provides no warranties, either express or implied, about the accuracy, reliability, or completeness of the machine translation and disclaims all liability for any losses or damages caused by, or resulting from your reliance on, this translation. The English version of this website is the official version.