Multi-axis toolpath is out of position between Haas Mill and Fusion 360

Autodesk Support

Oct 8, 2023

Products and versions covered

Issue:

A multi-axis toolpath is out of position on a Haas Mill when created in Fusion 360.
The simulation looks correct and the rotations move as expected on the machine tool, but the Z axis is incorrect, resulting in the tool cutting too high or too low.

Causes:

The machine tool is not equipped or fitted with Dynamic Work Offsets (DWO) and the toolpath setup is not on the center of rotation.

Solution:

To correct the output, do the following:

Move the Setup to the machine tools center of rotation.

Products:

Fusion;

Was this information helpful?

Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.

Ask the Assistant

What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.