All vertical pipes shown as rises in Revit

Autodesk Support

Dec 12, 2024


Products and versions covered


Issue:

Users reported that all vertical pipes are shown as rises regardless of whether they are going up or down from the ceiling.

  • Adjusting the rise symbol in the Pipe System Settings changes the graphics for all pipes in the view, including drops.
  • Behavior occurs in Reflected Ceiling Plan views

Image showing rise symbol and Type setting for rise/drops

 

Status:

This incident is being investigated for a possible cause and resolution.

Additional Information:

  • Prior to 2021, view range was used to decide whether the pipe is a drop or rise.
  • In 2021 and later, if the pipe is connected to a fitting or equipment above it and that element is visible in the view, it is a drop, otherwise it is a rise.
  • However, it seems that the new rule for 2021 and later is only applied to the plan view, not reflected ceiling plan view.

Products:

Revit Product Family;

Versions:

2021; 2022; 2024; 2023;

Incident ID:

215681


Was this information helpful?


Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.


What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support