Is it possible to see what does the yellow warning triangle for Offpage Connectors mean in AutoCAD Plant 3D

Autodesk Support

Mar 15, 2024

Products and versions covered

Issue:

Is it possible to see what does the yellow warning triangle for Offpage Connectors mean in AutoCAD Plant 3D?

Solution:

The yellow triangle will always be shown if minimum one property is different between the two connect pipe lines.
To overcome this, check the differences of the properties and, if needed, adopt them to have the same values.

Note: The yellow triangle is a warning only, not an error. This means that the OPCs are still connected and you might ignore it.

To check the difference between properties, perform the following steps:
  1. Select an Offpage Connector.
  2. Select "View Connected..". A "View Connected Offpage Connector" dialog would open showing the difference between properties, highlighted in yellow.

Products:

AutoCAD Plant 3D;

Was this information helpful?

Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.

Ask the Assistant

What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support