Issue:

You would like to know the workflow for adding the Stress, Mises-Hencky result to your Moldflow warp results.

Solution:

Open the process setting wizard,
Select Advanced Options.
Select Edit next to Thermoplastic injection molding solver parameters
Select the Stress Analysis tab
Select Mises-Hencky stress under the Stress result(s) to output. Select OK twice and then Next to navigate to page 2 of the Process Settings Wizard

6. On page 2 of the Process Settings Wizard, under Stress result(s) to output, again select Mises-Hencky stress
User-added image

Select Finish to exit out of the Process Setting Wizard.

7. Navigate to the Moldflow Insight icon and select options
User-added image

8. Under the Options tab, select Results
9. Select Add/Remove under Default results
User-added image

10. Scroll down to the Warp results folder until you locate Stress, Mises-Hencky (warp). Select it.
11. Click the double arrow icon to add this result to the Default results and select OK
12. Stress, Mises-Hencky (warp) will not show as a Default result option
User-added image

Products:

Moldflow Insight;

Versions:

all;