Want a Fusion 360 post processor for a GOODWAY GLS-2800YS CNC Lathe with FANUC 0i-F Control.

Autodesk Support

Oct 8, 2023


Products and versions covered


Issue:

Looking for a Fusion 360 post processor for a GOODWAY GLS-2800YS CNC Lathe with FANUC 0i-F Control.

Causes:

There is no generic standard Fusion 360 post processor listing for a GOODWAY GLS-2800YS CNC Lathe with FANUC 0i-F Control within the Post library.





 

Solution:

Work-around is to copy and edit an existing generic post processor from the Post library.

Note -
  • The closest postprocessor listed within the Fusion Post library with a similar structure would be for the Doosan turn mill which has the (same control/same format of spindles/turrets) -
  • Need to configure the Doosan Post spindles, turrets, and M codes, and so on, to match the Goodway Kinematics for this to work OK within Fusion... 
Click link for Location of Doosan post in the Fusion 360 Post library.  

Products:

Fusion;


Was this information helpful?


Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.


What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support