Building Orientation in BIM

Autodesk Support

May 5, 2018

Introduction:

Orientation is one of the design factors that should be considered early in the design process because the building’s orientation to the sun has a considerable impact on the building’s heating and cooling loads. You can use Insight to rapidly explore the effect of rotating a building’s orientation on the site and see the impact on the predicted building performance.

Finding the best building orientation is a powerful passive design strategy for improving the building’s performance by maximizing the positive effect of solar radiation on the building’s heating and cooling loads as well as the photovoltaic potential of roof surfaces.

This video shows the workflow for editing the building’s orientation and evaluating its impact on the building’s energy performance.

Workflow Steps:

Open the Model

  • Open the Classroom-No Shades Revit model(Please find the attachment).

View Insight Results for the Model

  • If needed, generate insights for this model
    • Click the Analyze tab and click Generate insights.
  • Click Optimize to access the results.

​Save Baseline Assumptions as a Scenario

  • Select and open a project to set the baseline settings.
  • Set a range or value for the following Factors:
    • Operating Schedule: 12/6
    • Lighting Efficiency: 0.7 – 0.3 W/sf
    • Plug Loads Efficiency: 0.6 W/sf
  • Select the Add Scenario button at the top right of the model viewer.
  • Click the action button (the three dots to the right of the Untitled Scenario name), then choose Rename from the pop-up menu to change the name of this scenario.
  • Set the name of this scenario to Baseline Scenario.

View the Potential Effect of Building Orientation

  • Scroll down the Insight interface to view the Building Orientation factor.
  • Note the range of values being considered in the current settings.
  • Click the factor to edit the settings for Building Orientation
  • Hover the pointer over each of the points representing an option for building orientation to see the effect on the EUI mean (or Annual Cost mean) associated with that option.

The As-Modeled value is labeled as BIM and is displayed with a triangular marker. Each of the other options displays the potential change in the EUI mean (or Annual Cost mean) associated with choosing that option.

The drag handles at the bottom of the graph and the blue shading indicate the range of options currently being considered in the analysis.

Select the Range of Values to be Considered for the Building Orientation factor

  • First, select a rotation of 90 degrees.
    • Drag the handles at the left and right ends of the factor range to select the options to be considered in the analysis.
    • Note the impact of the EUI mean (or Annual Cost mean).
  • Second, set the range to the BIM As-Modeled value.
    • Note how the EUI mean (or Annual Cost mean) changes to reflect the new range of values selected for this factor.
    • Also, note how your EUI mean (or Annual Cost mean) compares to the ASHRAE 90.1 and Architecture 2030 baselines following this change.

Attachments


Was this information helpful?

Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.

Ask the Assistant

What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support