Module

2 hr. 55 min.

Create toolpaths for brake caliper OP1

Module overview

In this module, you'll set up and create toolpaths to machine the first operation of a brake caliper using 2.5-axis toolpaths and a 3D adaptive clearing toolpath.

After completing this module, you’ll be able to:

  • Create a CAM Setup.
  • Locate stock and workholdings in CAM.
  • Create toolpaths to rough a part.
  • Create toolpaths to finish a part.
  • Simulate toolpath.

 

Module outline

  • Set up Stock and WCS
  • Adaptive Clear Stock
  • Cut an external contour
  • Rough and finish the piston bore
  • Finish mounting faces
  • Drill mounting holes
  • Deburr and Simulate
  • Practice exercise
  • Practice exercise
  • Challenge assignment
  • Module quiz