• Revit

Create floors in Revit

Place floors and define floor slopes in Revit.


Tutorial resources

These downloadable resources will be used to complete this tutorial:


00:04

In Revit, you create floors by defining their boundaries, either by picking walls or by using drawing tools.

00:12

When floors are created, they are created in a downward direction from the floor level.

00:18

You can create a sloped floor, add slab edges to a floor, or create multi-layer floors.

00:26

To complete this exercise, open the CreatingFloors [2024].rvt exercise file.

00:33

On the Architecture ribbon, in the Build panel, click Floor.

00:38

Notice that the Architectural floor is the default Floor tool.

00:43

Expand the Type Selector and choose the type of floor you want to create.

00:49

On the Modify|Create Floor Boundary ribbon, Boundary Line is selected by default, and Pick Walls is the default Draw option.

00:60

Pick Walls and Pick Lines allow you to pick existing walls and lines in your model.

01:07

In addition, you can use a combination of the other Draw tools to sketch the floor boundary.

01:15

For this example, select Pick Lines and pick the interior boundary of the building.

01:21

After you have a closed sketch boundary, click Finish Edit Mode to create the floor.

01:27

Note that the tool will yield a warning error if the boundary lines are not in a closed loop or if any line segments overlap.

01:36

By default, when you create floors in Revit, they are flat.

01:41

To slope the floor, you can choose a floor boundary line to define the slope, or you can add a slope arrow.

01:49

To see how this works, create another floor.

01:53

This time, sketch a small pad on the north side of the building.

01:59

Next, select a floor boundary line.

02:05

On the Options bar, select Defines Slope.

02:09

A slope icon now appears next to the boundary line, with a value.

02:14

Set a new Slope value and in the Options bar, then deselect Defines Slope to remove the slope.

02:23

Next, in the Draw panel, click the Slope Arrow tool.

02:29

You do this when you’re defining a new floor.

02:34

To define a slope, you can use the Line option to draw a slope arrow manually

02:40

or the Pick Lines tool to pick a floor boundary line.

02:43

Here, click Pick Lines, and then select a floor boundary line.

02:49

In the Properties palette, next to Specify, choose either Height at Tail or Slope.

02:57

The Height at Tail options allows you to specify the Height Offset at Tail and the Height Offset at Head.

03:05

The Slope option allows you to define the Slope pitch.

03:09

After you define the slope, click Finish Edit Mode.

03:13

Switch to the East elevation view to review the results.

03:18

Floors in Revit are easy to create and modify.

Video transcript

00:04

In Revit, you create floors by defining their boundaries, either by picking walls or by using drawing tools.

00:12

When floors are created, they are created in a downward direction from the floor level.

00:18

You can create a sloped floor, add slab edges to a floor, or create multi-layer floors.

00:26

To complete this exercise, open the CreatingFloors [2024].rvt exercise file.

00:33

On the Architecture ribbon, in the Build panel, click Floor.

00:38

Notice that the Architectural floor is the default Floor tool.

00:43

Expand the Type Selector and choose the type of floor you want to create.

00:49

On the Modify|Create Floor Boundary ribbon, Boundary Line is selected by default, and Pick Walls is the default Draw option.

00:60

Pick Walls and Pick Lines allow you to pick existing walls and lines in your model.

01:07

In addition, you can use a combination of the other Draw tools to sketch the floor boundary.

01:15

For this example, select Pick Lines and pick the interior boundary of the building.

01:21

After you have a closed sketch boundary, click Finish Edit Mode to create the floor.

01:27

Note that the tool will yield a warning error if the boundary lines are not in a closed loop or if any line segments overlap.

01:36

By default, when you create floors in Revit, they are flat.

01:41

To slope the floor, you can choose a floor boundary line to define the slope, or you can add a slope arrow.

01:49

To see how this works, create another floor.

01:53

This time, sketch a small pad on the north side of the building.

01:59

Next, select a floor boundary line.

02:05

On the Options bar, select Defines Slope.

02:09

A slope icon now appears next to the boundary line, with a value.

02:14

Set a new Slope value and in the Options bar, then deselect Defines Slope to remove the slope.

02:23

Next, in the Draw panel, click the Slope Arrow tool.

02:29

You do this when you’re defining a new floor.

02:34

To define a slope, you can use the Line option to draw a slope arrow manually

02:40

or the Pick Lines tool to pick a floor boundary line.

02:43

Here, click Pick Lines, and then select a floor boundary line.

02:49

In the Properties palette, next to Specify, choose either Height at Tail or Slope.

02:57

The Height at Tail options allows you to specify the Height Offset at Tail and the Height Offset at Head.

03:05

The Slope option allows you to define the Slope pitch.

03:09

After you define the slope, click Finish Edit Mode.

03:13

Switch to the East elevation view to review the results.

03:18

Floors in Revit are easy to create and modify.

Was this information helpful?