Performing a batch simulation of scenarios

00:04

Once you have set up multiple scenarios with various settings and conditions,

00:08

you can perform a batch simulation of all

00:10

scenarios to later compare the outputs between them.

00:14

The outputs can be displayed as graphs or tables

00:18

or you can use the scenario comparison tool

00:21

to begin.

00:22

Double click the desired project dot APR X file to open

00:26

Agis Pro.

00:28

Once the project starts,

00:30

click the info water pro tab to open the info water pro ribbon

00:35

in the project panel, click initialize

00:39

in the model explorer,

00:40

select base base data scenario from the scenario dropdown list.

00:47

Switch to the command center tab,

00:49

expand the tools folder

00:51

and then double click batch simulation

00:55

in the batch simulation manager. Ensure that the active scenario is set to base.

01:00

The simulation type is set to standard hydraulic slash quality simulation.

01:05

And the error handling option is set to continue regardless of errors,

01:11

expand the executive order dropdown and set it to bottom up.

01:15

Then in the scenario selection box rearrange the scenarios by selecting each

01:20

and then clicking move up or move down as needed in this order

01:25

base base data scenario,

01:28

existing

01:30

E

01:31

max day

01:33

E X all pumping

01:44

scenarios except for base base data scenario to select them.

01:50

The selected scenarios are highlighted in blue,

01:53

then click run.

01:55

Since the execution order is bottom up,

01:58

the existing scenario will be the active scenario when the process is finished.

02:03

Be sure to watch the message board to see if any scenario runs fail.

02:08

Once the scenarios have completed running,

02:10

click close to exit the batch simulation manager.