Module

35 min.

Import Civil 3D Surfaces and Site Information into Revit

Module overview

Importing a Civil 3D TOPO surface and site information into Revit allows you to see how the building will look in context with its surroundings. Learn how to take advantage of work already done by the surveyor and/or civil engineer, saving you time in recreating their work.

This content takes approximately 35 minutes to complete. By the end, you should be able to:

  • Set up BIM360
  • Prepare the Civil 3D Model
  • Set the GeoLocation

Before you start

  • Please make sure you have the Revit and Civil 3D software loaded.
  • If you have technical difficulties, please reach out to product support. 

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction to Sharing Information with Revit (1:43 min)
  • Setting up BIM360 (5:40 min)
  • Adding Users to BIM 360 (4:05 min)
  • Preparing Civil 3D (5:30 min)
  • Exporting Topo (2:55 min)
  • Setting GeoLocation (8:30 min)
  • Finalize the Revit Model for Coordination (5:42 min)
  • Moving Existing (5:41 min)
  • Import Civil 3D Surfaces and Site Information into Revit - Quiz
  • Learn More or Get Help on This Topic