Configure time windows and person types parameters.
Transcript
00:03
Mobility Simulation is an integrated multimodal mobility simulation engine for InfraWorks.
00:09
When creating animated simulations of pedestrian movement,
00:14
you need to configure certain parameters for the simulation to be realistic.
00:18
With two walkways and two areas defined already in InfraWorks Mobility Simulation,
00:23
you can begin defining parameters such as time windows and person types.
00:28
First, apply a time window for the simulation to populate pedestrian traffic.
00:33
From the toolbar, expand Parameters and select Terms.
00:38
The Terms dialog displays.
00:41
In the table, Simulation row, adjust the time window to be 25 minutes in length.
00:47
In this example, the start time is 08:00.
00:51
In this case, in the End time cell, enter “08:25”.
00:56
Click Apply, and then click OK.
01:00
Next, apply demand, or people.
01:03
Again, expand Parameters but this time, choose People.
01:07
This opens the Person Types dialog, which currently displays no information.
01:12
Click New (+).
01:14
In the table, a Person Type automatically generates.
01:19
You can configure the Person Type description, behavior, display color, and avatar group here.
01:27
In the table, click the Color cell and a Choose Color dialog displays.
01:33
Use the color picker to select a display color for this person type.
01:37
Click OK.
01:40
Back in the table, expand the Avatar Group cell, where you can choose Adult or Child avatars.
01:47
Here, select Adult.
01:49
Next, open the Size tab.
01:52
Again, click New (+).
01:54
Here, you can configure the size of the Person Type, including length, width, height, and mass.
02:02
You can also configure the spacing around each person type.
02:06
Open the Motion tab, and again, add a new Person Type.
02:10
Notice that you can adjust various speed parameters here.
02:14
Finally, open the Attachment tab.
02:16
Here, you can attach person types to one another as well as configure different controls and attachment angles.
00:03
Mobility Simulation is an integrated multimodal mobility simulation engine for InfraWorks.
00:09
When creating animated simulations of pedestrian movement,
00:14
you need to configure certain parameters for the simulation to be realistic.
00:18
With two walkways and two areas defined already in InfraWorks Mobility Simulation,
00:23
you can begin defining parameters such as time windows and person types.
00:28
First, apply a time window for the simulation to populate pedestrian traffic.
00:33
From the toolbar, expand Parameters and select Terms.
00:38
The Terms dialog displays.
00:41
In the table, Simulation row, adjust the time window to be 25 minutes in length.
00:47
In this example, the start time is 08:00.
00:51
In this case, in the End time cell, enter “08:25”.
00:56
Click Apply, and then click OK.
01:00
Next, apply demand, or people.
01:03
Again, expand Parameters but this time, choose People.
01:07
This opens the Person Types dialog, which currently displays no information.
01:12
Click New (+).
01:14
In the table, a Person Type automatically generates.
01:19
You can configure the Person Type description, behavior, display color, and avatar group here.
01:27
In the table, click the Color cell and a Choose Color dialog displays.
01:33
Use the color picker to select a display color for this person type.
01:37
Click OK.
01:40
Back in the table, expand the Avatar Group cell, where you can choose Adult or Child avatars.
01:47
Here, select Adult.
01:49
Next, open the Size tab.
01:52
Again, click New (+).
01:54
Here, you can configure the size of the Person Type, including length, width, height, and mass.
02:02
You can also configure the spacing around each person type.
02:06
Open the Motion tab, and again, add a new Person Type.
02:10
Notice that you can adjust various speed parameters here.
02:14
Finally, open the Attachment tab.
02:16
Here, you can attach person types to one another as well as configure different controls and attachment angles.
