Use the Domain Manager to create a Selection Set, based on a sub-selection of the current domain.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
Transcript
00:03
The domain manager is used to create
00:06
edit and delete elements contained within a domain
00:10
because a domain is essentially a temporary subset of network components.
00:15
You can create a selection set directly within the domain manager.
00:19
Selection sets are good to use for any domain
00:22
that is repeatedly used or difficult to set up.
00:26
They are also a great way to find features on the map from an output report
00:30
to begin.
00:31
Double click the desired project dot APR file to open arc
00:35
GIS
00:36
pro.
00:37
Once the project starts,
00:38
click the info water pro tab to open the info water pro ribbon
00:43
in the project panel, click initialize
00:47
on the info water pro ribbon
00:49
in the domain panel, click domain manager
00:54
in the domain manager, click clear to clear the domain
00:58
select DB query as the element source.
01:01
Choose eight I N underscore Z 48 inch pipes in zone four from the drop down list
01:08
and click add.
01:11
This is a domain that includes all the eight inch pipes in zone four in
01:14
which you can now find all the critical pipes within it for your subset.
01:20
Now select map selection as the element source and click subselect
01:26
while the add option adds more features to the current domain.
01:30
The subselect option is used to choose features among those already in the domain.
01:35
In this case,
01:36
only pipes in the domain that are selected on the map remain in the domain.
01:42
Next, choose the desired pipes in the map.
01:45
Click and drag to multi select a group of pipes
01:47
in the map such as in the top right corner.
01:51
The selected pipes are highlighted
01:54
right, click in the map area and select, enter
01:58
the domain manager window reappears
02:01
click save
02:04
in the selection set window. Click new from the toolbar.
02:07
Enter a new id of critical underscore pipes and click. Ok,
02:12
click, OK. Again to save the selection set
02:18
when you are finished,
02:18
be sure to click clear in the domain manager to
02:21
clear the selection set and then save your project.
00:03
The domain manager is used to create
00:06
edit and delete elements contained within a domain
00:10
because a domain is essentially a temporary subset of network components.
00:15
You can create a selection set directly within the domain manager.
00:19
Selection sets are good to use for any domain
00:22
that is repeatedly used or difficult to set up.
00:26
They are also a great way to find features on the map from an output report
00:30
to begin.
00:31
Double click the desired project dot APR file to open arc
00:35
GIS
00:36
pro.
00:37
Once the project starts,
00:38
click the info water pro tab to open the info water pro ribbon
00:43
in the project panel, click initialize
00:47
on the info water pro ribbon
00:49
in the domain panel, click domain manager
00:54
in the domain manager, click clear to clear the domain
00:58
select DB query as the element source.
01:01
Choose eight I N underscore Z 48 inch pipes in zone four from the drop down list
01:08
and click add.
01:11
This is a domain that includes all the eight inch pipes in zone four in
01:14
which you can now find all the critical pipes within it for your subset.
01:20
Now select map selection as the element source and click subselect
01:26
while the add option adds more features to the current domain.
01:30
The subselect option is used to choose features among those already in the domain.
01:35
In this case,
01:36
only pipes in the domain that are selected on the map remain in the domain.
01:42
Next, choose the desired pipes in the map.
01:45
Click and drag to multi select a group of pipes
01:47
in the map such as in the top right corner.
01:51
The selected pipes are highlighted
01:54
right, click in the map area and select, enter
01:58
the domain manager window reappears
02:01
click save
02:04
in the selection set window. Click new from the toolbar.
02:07
Enter a new id of critical underscore pipes and click. Ok,
02:12
click, OK. Again to save the selection set
02:18
when you are finished,
02:18
be sure to click clear in the domain manager to
02:21
clear the selection set and then save your project.
The Domain Manager is used to create, edit, and delete elements contained within a domain. Because a domain is essentially a temporary subset of network components, you can create a selection set directly within the Domain Manager.
Selection sets are good to use for any domain that is repeatedly used or difficult to set up. They are also a great way to find features on the map from an output report.
This is a domain that includes all the 8-inch pipes in Zone 4, in which you can now find all the critical pipes within it for your subset.
While the Add option adds more features to the current domain, the Sub-Select option is used to choose features among those already in the domain. In this case, only pipes in the domain that are selected on the map remain in the domain.
To choose the desired pipes in the map:
The group of pipes that you selected and saved as CRITICAL_PIPES is now available as a selection set:
